RUGER SR-SERIES

More documents

Recommendations

Info

4. Remove fingers (or whatever you used to push the ejector forward) from ejection port. From the right side of the pistol, press inward on the takedown pin (see Figure 18a) and remove it from the pistol (see Figure 18b). Press Takedown Pin Figure 18b Pull Out Figure 18a Remove Slide Assembly Figure 19 5. Carefully allow the slide to move forward until it is no longer under spring tension. Now push the slide forward and remove the entire slide assembly from the frame. (See Figure 19.) 6. With the slide held upside down, slightly depress the recoil spring to disengage it from its seat against the barrel lug. (See Figure 20.) Lift the recoil spring forward and upward to remove it from the slide. Figure 20 Remove Recoil Spring 26
7. Move the barrel slightly foward to disengage it from the slide. Lift the barrel up and out of the slide. (See Figure 21.) Your pistol is now field stripped and ready for cleaning. There is normally no need for further disassembly of the pistol. Figure 22 Remove Barrel Figure 21 Slide Barrel Recoil Spring Magazine Frame Takedown Pin <strong>SR</strong>9C TM Fully Field Stripped WARNING - DISASSEMBLY Retract slide 3 Be sure to 4 eject cartridge Point in safe 1 direction Always unload a firearm before cleaning, lubrication, disassembly or assembly. 2 Remove magazine UNLOAD BEFORE DISASSEMBLY 27
Page 1 and 2: S INSTRUCTION MANUAL FOR BLUED & ST
Page 3 and 4: Maine: “ENDANGERING THE WELFARE O
Page 5 and 6: FIREARMS SAFETY IS YOUR RESPONSIBIL
Page 7 and 8: Sights have high-visibility white d
Page 9 and 10: Use the Correct Lock: While the bas
Page 11 and 12: The user of this or any autoloading
Page 13 and 14: STRIKER STATUS INDICATOR Your SR-SE
Page 15 and 16: TO LOAD AND FIRE Practice this impo
Page 17 and 18: OPERATION OF LOADED CHAMBER INDICAT
Page 19 and 20: DRY FIRING Going through the action
Page 21 and 22: 4. To close the slide, again check
Page 23 and 24: 3. Release the slide to move forwar
Page 25: TO DISASSEMBLE Be sure pistol is un
Page 29 and 30: 5. Replace the slide onto frame. Pu
Page 31 and 32: 3. Now reverse the backstrap (see F
Page 33 and 34: WARNING - LUBRICATION Firing a pist
Page 35 and 36: Guns should be sent prepaid. We wil
Page 37 and 38: RUGER ® SR9 ® , SR40 ® & SR45 P
Page 39 and 40: RUGER ® SR9 ® , SR40 ® & SR45 E
Page 41 and 42: Key No. Part Name Part No. Model 44
Page 43 and 44: THE BASIC RULES OF SAFE FIREARMS HA
Page 45 and 46: 5. BE SURE OF YOUR TARGET BEFORE YO
Page 47 and 48: A BRIEF ACCOUNT OF AN EXTRAORDINARY

RUGER SR-SERIES

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?