TABLE CONTENTS

TORCH EQUIPMENT & GAS SAVERS
TWIN ARC NOZZLE CLEANING STATION Model EL-NCS-A-TA
The Torch Wizard TM Twin Arc Nozzle Cleaning Station is specially
designed for removing spatter build-up in twin arc torches. Anti-
Spatter (Blue Magic TM ) is applied via the cutter’s center allowing
reaming and spraying simultaneously for shorter cleaning cycles and
higher part production. One year warranty.
Product Features
> Automatically switches from one nozzle to the other, quickly and
effectively cleaning both tips on twin arc torches
> Adjustable feed rate promotes optimal cleaning results
> Additionally, it has all the same features and uses the same
reamer blades as the Torch Wizard Nozzle Cleaning Station
JET
GAS SAVER MODEL GFJ
SCREEN
INERT GAS SAVERS
> Reduces gas consumption
> Restricts gas surge upon arc starts
> Designed to install into the outlet side of the gas solenoid*
> Flow jets can be changed depending on application
GAS SAVER MODEL GFJ-0013
GAS SAVER MODEL GFJ-0014
PART NO. JET 30 PSI 35 PSI 40 PSI 45 PSI 50 PSI 55 PSI
GFJ-1** 1 10 CFH 11 CFH 12 CFH 13 CFH 14 CFH 15 CFH
GFJ-2** 2 29 CFH 33 CFH 36 CFH 39 CFH 42 CFH 45 CFH
GFJ-3** 3 51 CFH 55 CFH 61 CFH 66 CFH 71 CFH 76 CFH
Jet #1 TIG (GTAW)
Jet #2 MIG (GMAW) Light Wire
Jet #3 MIG (GMAW) Heavy Wire
*1/4" NPT thread to ensure the filter is ahead or up stream of the FloJet
** Part Numbers (with jets):
GFJ - GFJ-1, GFJ-2, GFJ-3
GFJ-0013 - GFJ-1B, GFJ-2B, GFJ-3B
GFJ-0014 - GFJ-1A, GFJ-2A, GFJ-3A
STICK-OUT MEASUREMENT BLOCK Model EL-SMB
Measures wire stick-out. Can be used with any torch.
EL-SMB
32