TABLE CONTENTS

WELD CELL ACCESSORIES
WIRE STRAIGHTENER Models WS-1000, WS-1000-H, & WS1000-A
Wire Wizard TM manufactures three versions of wire straighteners that can be used to straighten or recast all
types of wire. The main body is constructed of aluminum making our straighteners some of the lightest in
the market. All models are equipped with a locating calibration on the face of the unit and a fine adjustment
scale on the tension knob. This results in an extremely fast and accurate setting of wire cast. Our full
range of fittings and inlet guides guarantee a trouble-free fit for any application or system. Please refer
to part numbers (must be ordered separately) and applications below.
Product Features
WS-1000 Specifications
> For all types of steel wire Height: 3" (76.2mm) Length: 3.5" (88.9mm)
> Fittings and guides are universal to both units Depth: 1.5" (38.1mm) Weight: 1 lb (.45kg)
> Hard chrome, U-groove wheels Wire: .045 diameter and under
A-1QD
1/4"–18
NPT
.75 DEEP
1.0
.69
A-1LNS
A-1C-S DELRIN
SAME ID & OD AS A-1LNS
.498
.498
.156
.125
WS-1000 STEEL WIRE
STRAIGHTENER
.156
.498
2.56
1.75
A-1LNS
3.56
A-1-330S
1.0
.373
1/4"–18 NPT
.75 DEEP
.498
.109
.156
.330
A-1M-S
MILLER
A-1H-S
HOBART
.125
1/2"–14
NPT
.75 DEEP
.69
1.25
A-1D-S DELRIN
.498
WS-1000-H
.498
.125
.109
WS1000-A ALUMINUM WIRE
STRAIGHTENER
WS-1000-H Specifications
Height: 3" (76.2mm) Length: 5.5" (139.7mm)
Depth: 2" (50.8mm Weight: 3 lbs (1.36kg)
Wire: .045 diameter and over
A-1C-S DELRIN
A-1D-S DELRIN
WS1000-A Features & Specifications
> For all sizes of aluminum and non-ferrous metals Height: 3" (76.2mm) Length: 3.5" (88.9 mm)
> V-groove wheels prevent changes in helix Depth: 1.5" (38.1mm) Weight: 1 lb (.45 kg)
> All fittings are non-conductive
26
.109
2.56
2.56
.498 1.25
.498
.373
.109
.109
A-1H-SD
HOBART
A-1M-SD
MILLER
1/2"–14 NPT
.75 DEEP