TABLE CONTENTS

WOOD REEL DISPENSING EQUIPMENT
MOTORIZED VERTICAL DEREELER Model WWA-1
Designed for ultra accurate welding, this heavy-duty analog controlled
dereeler acts more like a robot. By using a multiple pulley
system and maintaining a slight tension on the wire, our special
regenerative DC motor drive allows an effortless feed of stainless,
aluminum, flux-cored and all diameters of standard wire. This unit
can also be wired for reversing capabilities (optional). For modification
options, please contact our customer service department.
Benefits and Cost Savings
> Spools roll into place in seconds — no forklift needed
> 1/2 HP permanent magnet motor with heavy-duty gear box
> No distortion, knurling, stretching or wire flip
> Prevents tip wear, pulsating, burn back and blown holes
> Eliminates flux-core splitting
> Less pull on the feed motor; ideal for long runs
> Accepts spool widths up to 18.5"
Specifications
Height: 54" (1.372m) Width: 36" (914.4mm)
Length: 30" (762mm)
Weight: 200 lbs (90.9kg)
Capacity: 250-1000 lb (113.5 kg-454 kg) spools
WWA-1 MOTORIZED
MECHANICAL VERTICAL DEREELER Model WWA-2
The Wire Wizard TM WWA-2 is a heavy-duty, mechanical pay off
stand with a special low-back tension braking device. Dispenses
wire in bulk form, slow or fast (3 to 7 lbs pulling force), depending
on the feed speed. Designed for 30" diameter spools, it can also
be adapted for 22" to 26" diameter spools — please contact our
customer service department for more details.
Benefits and Cost Savings
> Uses bulk wire allowing fewer changes
> High speed efficiency — feeds wire up to 2000 IPM
> Spools load in seconds for minimal downtime
> Smallest in the market with the quickest stopping time
> Accepts spool widths up to 18.5"
Specifications
Height: 54" (1.37m) Width: 28" (711.2mm)
Length: 30" (762mm)
Weight: 120 lbs (54.6kg)
Capacity: 250 -1000 lb spools Wire Size: .030- 3/16" standard
WWA-2 MECHANICAL
11