DESMOPOL ACELERADOR

TECHNICAL INFORMATION
AUTHOR TECNOPOL TECHNICAL SERVICE
SERTECNOPOL
REFERENCE DESMOPOL ACELERADOR
VERSION v.3
DESMOPOL ACELERADOR REVISION DATE 04/07/2013
PAGE
1/3
COMMENTS
The information in this data sheet is based on our current knowledge and the EU laws and national. The product should not be
used for purposes other than those specified. It is always the responsibility of the user to take the necessary measures to comply
with the requirements of current legislation. The information contained in this form should not be considered as a guarantee of its
properties.
DESCRIPTION:
DESMOPOL ACELERADOR is an additive that gives the
DESMOPOL accelerated curing time. Improved their
mechanical propierties.
It is ideal for extreme environmental conditions (low
temperatures), while improving performance mechanical
properties of the membrane.
Also, it’s an additve for single-layer applications-
ACCEPTED USES:
In the following situations::
• Accelerant curing time DESMOPOL
• Elimination of bubbles and other defects in the
membrane of DESMOPOL
• Allows applications of
DESMOPOL on a thick film
( 2 mm. ), and only with one
process
DESMOPOL SOLVENT.
• Density: 0,95 g/cm3
• Do not use any type of machine or airless spray
application to apply membrane DESMOPOL when
mixed with DESMOPOL ACCELERATOR is
performed.
PERFORMANCE:
The performance of this product is 2l. ( 1,7 kg ) of each 25
kg. of DESMOPOL.
NOTE: this fixed performance, can not be
varied, either by excess or by defect,
otherwise the membrane will never not form
in the appropriate conditions of use.
PRESENTATION FORMATS:
Metal tins of 2 l. (1,7 kg )
COLOURS
GENERAL FEATURES:
• Accelerated curing time DESMOPOL especially in
winter, cold weather and low relative humidity,
with the addition of DESMOPOL ACELERADOR.
• It allows the application of thick DESMOPOL.
This represents a saving of execution time
• Eliminates the formation of air inside the
membrane, bubbles and other defects in curing
membrane thixotropy Increased product.
• Increased mechanical properties of the membrane
DESMOPOL.
• Cleaning materials are made with solvent
Colorless.
EXPIRY:
12 months at temperatures between 5° C and 25° C,
provided it is stored in a dry place. Once the tin has been
opened, the product must be used immediately.
APPLICATION:
In general, the following aspects should be dealt:
.-All the container 2l. (1.7 kg ) is the amount needed for
optimal reaction with a mixture of 25 kg. of DESMOPOL.
.-Prior to using the DESMOPOL ACELERADOR shake.

TECHNICAL INFORMATION
AUTHOR TECNOPOL TECHNICAL SERVICE
REFERENCE
ACELERADOR DESMOPOL
VERSION v.3
ACELERADOR DESMOPOL REVISION DATE 28/07/2013
PAGE
2/3
COMMENTS
The information in this data sheet is based on our current knowledge and the EU laws and national. The product should not be
used for purposes other than those specified. It is always the responsibility of the user to take the necessary measures to comply
with the requirements of current legislation. The information contained in this form should not be considered as a guarantee of its
properties.
.-Incorporate DESMOPOL ACELERADOR to DESMOPOL
and mix with electric mixer avoiding incorporation of air.
Then apply DESMOPOL as usual.
.-Please check de pot life times table.
.-Normally, once incorporated DESMOPOL ACELERADOR
to DESMOPOL, is not necessary to add any other diluent.
.It’s important to use the product immediately after mixing
HANDLING AND TRANSPORT:
RT:
These safety recommendations for handling, are necessary
for the implementation process as well as in the pre-and
post, on exposure to the loading machinery.
Respiratory Protection: When handling or spraying use an
air-purifying respirator.
Skin protection: Use rubber gloves, remove immediately
after contamination. Wear clean body-covering. Wash
thoroughly with soap and water after work and before
eating, drinking or smoking.
Eye / Face: Wear safety goggles to prevent splashing and
exposure to particles in air.
Waste: Waste generation should be avoided or minimized.
Incinerate under controlled conditions in accordance with
local laws and national regulations.
Anyway, consult the safety data sheet of the product, are
publicly available.

TECHNICAL INFORMATION
AUTHOR TECNOPOL TECHNICAL SERVICE
REFERENCE
ACELERADOR DESMOPOL
VERSION v.3
ACELERADOR DESMOPOL REVISION DATE 28/07/2013
PAGE
3/3
COMMENTS
The information in this data sheet is based on our current knowledge and the EU laws and national. The product should not be
used for purposes other than those specified. It is always the responsibility of the user to take the necessary measures to comply
with the requirements of current legislation. The information contained in this form should not be considered as a guarantee of its
properties.
MIX WITH DESMOPOL DATA:
PROPIERTIES
WITHOUT DESMOPOL ACELERADOR
WITH DESMOPOL ACELERADOR
Pot life at 10ºC ---- 40 minutes
Pot life at 23ºC ---- 20 minutes
Tensile strength 3 ~ 4 MPa 5 ~ 7 MPa
Membrane dry time at 23ºC 5 ~ 6 hours 2 ~3 hours
Membrane dry time at 15ºC 6 ~ 8 hours 3 ~5 hours