TECNOFOAM I-2035
TECNOFOAM I-2035 - Tecnopol
TECNOFOAM I-2035 - Tecnopol
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
TECHNICAL INFORMATION<br />
AUTHOR<br />
REFERENCE<br />
Tecnopol Technical Service<br />
I-<strong>2035</strong> + G-2049.I<br />
PAGE<br />
<strong>TECNOFOAM</strong> I-<strong>2035</strong><br />
VERSION<br />
REVISION DATE<br />
v.3<br />
25/04/2013<br />
2 / 2<br />
COMMENTS<br />
The information in this data sheet is based on our current knowledge and the EU laws and national. The product should not be<br />
used for purposes other than those specified. It is always the responsibility of the user to take the necessary measures to comply<br />
with the requirements of current legislation. The information contained in this form should not be considered as a guarantee of its<br />
properties.<br />
PROPERTIES OF APPLIED FOAM AND COMPONENTS:<br />
MIX RATIO In Volume by Weight<br />
Polyol 100 100<br />
Isocyanate 100 105<br />
COMPONENT FEATURES “polyol”<br />
Indice de hidroxilo 220 – 260 mg KOH (UNE-53.985-1)<br />
Contenido en agua 2,0 – 2,5 % (ISO-14.897)<br />
COMPONENT FEATURES “ISOCYANATE”<br />
NCO Content 30 – 32 % (UNE-92.120-1)<br />
REACTIVITY (*)<br />
Cream time 25 +/-3 seconds (UNE-92.120-1)<br />
Fiber time 90 +/-10 seconds (UNE-92.120-1)<br />
Contact time 170 +/-15 seconds (UNE-92.120-1)<br />
Free density glass 38 - 42 grams / liter (UNE-92.120-1)<br />
APPLIED FOAM PROPERTIES (*)<br />
Density applied 40 - 47 grams / liter (UNE EN 1602)<br />
Thermal conductivity 0.022 ± 0.001 W / m · K (UNE-EN 12.667)<br />
Reaction to fire Class E (EUROCLASSES) (UNE EN 13.501-1)<br />
Water absorption (**) < 5% by volume M. INT.<br />
(*) Under laboratory conditions, according to the UNE-92120-1<br />
(**) The water absorption by the rigid polyurethane foam is produced as a function of environmental conditions and can<br />
take place by wetting or by diffusion and condensation of steam. Is influenced primarily by the density and dimensions.<br />
In any case, the moisture content in practice, not exceed 5% by volume.