POLYURETHANE
Sin tÃtulo-1 - Tecnopol
Sin tÃtulo-1 - Tecnopol
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Mastic data sheet<br />
DESMOPOL MASILLA-PU<br />
DESCRIPTION<br />
It is one-component polyurethane mastic, of rapid<br />
polymerization; in contact with moisture it forms an<br />
elastic solid sealant. This product is a free of solvent<br />
and PVC, ideal for sealing of cracks, voids, holes<br />
vertical and horizontal joints.<br />
PRESENTATION<br />
Box of 24 units, silted into ampoules of 600 ml, white<br />
and Grey colours<br />
RECOMMENDED USE<br />
Floor joints,cracks and voids (not for expansion<br />
joints)<br />
Industrial sealing,<br />
Doors sealing.<br />
Cooling industry sealing.<br />
RECOMMENDED SUBSTRATES<br />
Generally is compatible with paints, but is<br />
recommended to test on small area. With prolonged<br />
exposure to UV radiation, the superficial layer loses<br />
its shine, but it does not affect the waterproofing<br />
properties.<br />
ADVANTAGE<br />
Fast curing<br />
Excellent adhesion to most substrates.<br />
Excellent heat resistance for temperatures -40 º<br />
c to 90 º c<br />
Compatible with the paints once is dry.<br />
APPLICATION<br />
Requires a smooth surface, clean, dry and<br />
without residual moisture and as hard as<br />
possible.<br />
It must be applied at a temperature between<br />
+5°C to +40°C. With cold weather, store the<br />
product at 20°C before use.<br />
Immediate manipulation once mixed during<br />
application<br />
For the correct implementing, the width / depth<br />
ratio should be 2:1 at a minimum depth of<br />
10mm.<br />
Wipe off and dry with paper towels, than clean<br />
with DESMOPOL SOLVENT.<br />
19<br />
On damp substrates, the mastic requires a primer.<br />
TECHNICAL DATA<br />
PROPERTIES<br />
Hardness<br />
Application temperature<br />
Drying (to touch)<br />
Hardness<br />
Full curing (thickness 3 à 4mm)<br />
Elongation at tear<br />
CLASSIFICATION<br />
Shore A +/-50<br />
5 a 40 ºC<br />
30 a 60 minuts<br />
24 hours<br />
24 hours<br />
500%<br />
LIQUID <strong>POLYURETHANE</strong> MEMBRANE