POLYURETHANE
Sin tÃtulo-1 - Tecnopol
Sin tÃtulo-1 - Tecnopol
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>POLYURETHANE</strong> MEMBRANE DESMOPOL<br />
Waterproofing membrane data sheet:<br />
DESMOPOL<br />
16<br />
DESCRIPTION<br />
DESMOPOL is a liquid based on pure elastomeric<br />
polyurethane, once applied it produces a continuous<br />
elastic membrane, thanks to its excellent technical<br />
properties, this membrane is used for waterproofing<br />
application on many types of surfaces.<br />
APPLICATION<br />
DESMOPOL is one-component system, is applied by<br />
roller, brush or spraying equipment (airless), is possible<br />
the use of DESMOPOL with cold and damp weather,<br />
when it is raining and the membrane is not completely<br />
dry, the impact of rain can leave traces (small crater), in<br />
this case you could apply an extra coat DESMOPOL<br />
layer .<br />
USES<br />
Passable roof of particular use.<br />
Passable roof of intense use.<br />
Green roof. .<br />
Polyurethane foam.<br />
Civil Engineering (Construction) .<br />
Wet and humid surfaces. .<br />
Tanks.<br />
LIMITATION<br />
Not recommended for waterproofing of swimming pools<br />
or contact with water chemically treated.<br />
Recommended support:<br />
Concrete, cement, tiles, mortar, rehabilitation of acrylics<br />
surfaces, asphaltic sheet, wood, and metal oxidized or<br />
with galvanized coating.<br />
ADVANTAGES.<br />
Does not produces air ampoules even with thick<br />
layers.<br />
No requires primer generally.<br />
Easy, simple application.<br />
Rapid polymerization and fast curing.<br />
Excellent adhesion.<br />
Chemically resistant.<br />
Good stability at temperatures between -40 and<br />
+80 degrees.<br />
High mechanical resistance (abrasion, tension,<br />
fatigue, wear)<br />
Excellent elasticity.<br />
100% waterproof membrane .<br />
Allows vapor difusion.<br />
APPLICATION'S CONDITION<br />
Conditions of support (Standard)<br />
Hardness: R28 = 15 MPA<br />
Humidity: W