POLYURETHANE

DT5
Rehabilitation of roof
finished by polyurethane foam
4
3
2
1
SUBSTRATE
SYSTEM CREATION
PERFORMANCE
1
Surface's preparation: Should be cleaned and remove all
contaminants such as oil, grease, dust.
2
Thermal insulation: Applying of polyurethane foam layer (3cm,
density D/50) with dosing equipment at high pressure and
temperature.
2
1,5 Kg/m
Polyurethane Foam
3
Waterproofing membrane: DESMOPOL is applied by spraying
(GH-833 equipment),roller or brush the membrane should be
reinforced with mesh or geo-textile filter on encounters and special
points.
2
1 Kg/m
4
Finishing (optional): Apply directly TECNOTOP 1C, using roller,
squeegee or spray equipment on all surfaces treated previously.
2
0,150 Kg/m
DT6
Rehabilitation of roof
finished by metal sheet
4
3
2
1
13
SUBSTRATE
SYSTEM CREATION
PERFORMANCE
1
Surface's preparation: Should be cleaned and remove all
contaminants such as oil, grease, dust.
Different kind of
sheets; Galvanized
sheet. Lacquered
sheet. fibre-cement
board
2
3
Primer: PRIMER-PU 1050, adhesion layer is applied with a roller or
spray equipment.
Waterproofing membrane: DESMOPOL is applied by spraying
(GH-833 equipment),roller or brush the membrane should be
reinforced with mesh or geo-textile filter on encounters and special
points.
2
0,250 Kg/m
2
1 Kg/m
4
Finishing (optional): Apply directly TECNOTOP 1C, using roller,
squeegee or spray equipment on all surfaces treated previously.
2
0,150 Kg/m
LIQUID POLYURETHANE MEMBRANE