POLYURETHANE

POLYURETHANE MEMBRANE DESMOPOL
DT3
Passable flat roof,
gravel finished
5
4
3
2
1
SUBSTRATE
SYSTEM CREATION
PERFORMANCE
1
Repair of cracks and joints: DESMOSEAL MASTIC-PU is applied
locally on the expansion joints and cracks with a handgun and levelled
using a spatula.
Depends of
the application
2
Primer: PRIMER-PU 1050, adhesion layer is applied with a roller or
spray equipment.
2
0,250 Kg/m
Concrete
Mortar
3
Waterproofing membrane: DESMOPOL is applied by spraying
(GH-833 equipment),roller or brush the membrane should be
reinforced with mesh or geo-textile filter on encounters and special
points.
2
1,5 ~ 2 Kg/m
4
Separating layer: We install a PP geo-textile filter or mesh.
2
150 ~ 250 gr/m
5
Finishing: We place a gravel layer on the separating layer (2 to 4
cm).
12
DT4
Inverted roof
7
6
5
4
3
2
1
SUBSTRATE
SYSTEM CREATION
PERFORMANCE
1
Repair of cracks and joints: DESMOSEAL MASTIC-PU is
applied locally on the expansion joints and cracks with a handgun
and levelled using a spatula.
Depends of
the application
2
Primer: PRIMER-PU 1050, adhesion layer is applied with a roller or
spray equipment.
2
0,250 Kg/m
Concrete
Mortar
3
4
Waterproofing membrane: DESMOPOL is applied by spraying
(GH-833 equipment),roller or brush the membrane should be
reinforced with mesh or geo-textile filter on encounters and special
points.
Separating layer: We install a PP geo-textile filter or mesh.
2
2 Kg/m
2
250 gr/m
5
Thermal insulation: Installation of polystyrene boards
(recommended assembly according to the polystyrene board's
manufacturer).
2
1,5 ~ 2 cm/m
6
Separating layer: We install a PP geo-textile filter or mesh.
2
150 ~ 250 gr/m
7
Finishing: We place a gravel layer on the separating layer (2 to 4
cm).
2 ~ 4 cm.
canto rodado