Method 9. Prep of cores for testing - Asphalt Academy

ePAPER READ

DOWNLOAD ePAPER

asphaltacademy.co.za

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

START NOW

5. DETERMINATION OF THE INDIRECT TENSILE STRENGTH (ITS)

Follow the procedures described under Section D4.6 above for testing the core specimens to determine

the ITS DRY and ITS SOAKED values and the resulting TSR value. These values are then used to determine

whether the material has met the minimum specified requirements.

Note. Where the ITS results for specimens are in conflict with those obtained from core specimens, the

results for the core specimens should be taken as being the correct values.

Method 2. Determining Foam Characteristics of ... - Asphalt Academy

Vibratory Compaction Procedure - Asphalt Academy

DETERMINATION OF TRIAXIAL SHEAR PARAMETERS USING SIMPLE TRIAXIAL TEST

Updating Bituminous Stabilized Materials Guidelines Mix Design Report Phase II

Technical Guideline Bitumen Stabilised Materials

Method 7. MIST Conditioning and Test Procedure - Asphalt Academy

5. DETERMINATION OF THE INDIRECT TENSILE STRENGTH (ITS) Follow the procedures described under Section D4.6 above for testing the core specimens to determine the ITS DRY and ITS SOAKED values and the resulting TSR value. These values are then used to determine whether the material has met the minimum specified requirements. Note. Where the ITS results for specimens are in conflict with those obtained from core specimens, the results for the core specimens should be taken as being the correct values. 2

Page 1: DETERMINING THE STRENGTH OF CORE SP

Method 9. Prep of cores for testing - Asphalt Academy

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?