simatic s7-300 - megaelektrik.net

4
SIMATIC S7-300
Function modules
FM 352-5 High-Speed Boolean Processor
■ Technical specifications (continued)
6ES7 352-
5AH00-0AE0
6ES7 352-
5AH10-0AE0
Digital outputs
• Number of digital outputs 8 8
• M-switching
Yes
• P-switching
Yes
• Length of cable shielded, max. 600 m 600 m
• Length of cable unshielded, max. 100 m 100 m
• Short-circuit protection of the output
• Short-circuit protection of the output,
response threshold, typical
• Limitation of voltage induced on
circuit interruption to
Yes; Overvoltage
protection,
thermal protection
Yes; Overvoltage
protection,
thermal protection
1.7 A to 3.5 A 1.7 A to 3.5 A
2M +45 V typ,
(40 ..55 V)
Note: no protection
against
inductive kickback
>55mJ
2M +45 V typ,
(40 ..55 V)
Note: no protection
against
inductive kickback
>55mJ
• Lamp load, max. 5 W 5 W
• Driving a digital input No No
Output voltage
- Rated value (DC) 24 V 24 V
- for 0 signal (DC), max. 28.8 V 28.8 V
- for 1 signal (DC), max. 0.5 V 0.5 V
Output current
- for 1 signal rated value 0.5 A; at 60 °C 0.5 A; at 60 °C
- for 1 signal permissible range
for 0 to 60 °C, min.
5 mA 5 mA
- for 1 signal permissible range
for 0 to 60 °C, max.
600 mA 600 mA
- for 0 signal residual current, max. 1 mA 1 mA
Output delay at resistive load
- "0" to "1", max. 1 µs;
0.6 µs 50 mA /
1.0 µs 0.5 Amp
- "1" to "0", max. 1.5 µs;
1.7µs 50 mA /
1.5µs 0.5 Amp
Parallel switching of 2 outputs
- to increase power Yes; 2 Yes; 2
Switching frequency
- at resistive load, max. 100 kHz;
20 kHz at 0.5
amps;
100 kHz at 0.25
amp
- at inductive load, max. 2 Hz; 2 Hz at
0.5 amps with
external commutator
diodes;
0.5Hz at 0.5
amps without
external commutator
diodes
- at lamp load, max. 10 Hz 10 Hz
1 µs;
0.6 µs 50 mA /
1.0 µs 0.5 Amp
1.5 µs;
1.7µs 50 mA /
1.5µs 0.5 Amp
100 kHz;
20 kHz at 0.5
amps;
100 kHz at 0.25
amp
2 Hz; 2 Hz at
0.5 amps with
external commutator
diodes;
0.5Hz at 0.5
amps without
external commutator
diodes
6ES7 352-
5AH00-0AE0
Sensor supply
5 V - sensor supply
-5 V Yes Yes
- Short-circuit protection Yes; Electronic
overload protection.
Not
protected when
normal or
counter voltage
applied.
6ES7 352-
5AH10-0AE0
Yes; Electronic
overload protection.
Not
protected when
normal or
counter voltage
applied.
- Output current, max. 250 mA 250 mA
24 V - sensor supply
- 24 V Yes Yes
- Short-circuit protection Yes; Overcurrent
and overheating
protection pn
overload. Diagnostics,
if output
temperature
limit reached.
Not protected
when normal or
counter voltage
applied
Yes; Overcurrent
and overheating
protection pn
overload. Diagnostics,
if output
temperature
limit reached.
Not protected
when normal or
counter voltage
applied
- Output current, max. 400 mA 400 mA
Sensor
Connectable encoders
- Incremental encoder
(symmetrical)
Yes
Yes
- Incremental encoder
(asymmetrical)
Yes
Yes
- Absolute encoder (SSI) Yes Yes
- permissible closed-circuit current
(2-wire BEROS), max.
Yes; typ. 1 A Yes; typ. 1 A
Incremental encoder (symmetrical) 1.5 mA 1.5 mA
- Track mark signals
- Zero mark signal A, notA, B, notB A, notA, B, notB
- Input signal N, notN N, notN
- Input frequency, max. 5 V-Differenzsignal
(phys. RS 422)
- Length of cable (shielded), max. 1 MHz 1 MHz
- permissible closed-circuit
current (2-wire BEROS), max.
100 m; Cable
length, RS-422
(5V) incremental
encoder,
Siemens Type
6FX201-2, 5V
supply:
500kHz, 32
meters,
shielded, max.;
cable length,
RS-422 (5V)
incremental
encoder, Siemens
Type
6FX201-2, 24V
supply: 500
kHz, 100
meters,
shielded, max.
5 V-Differenzsignal
(phys. RS 422)
100 m; Cable
length, RS-422
(5V) incremental
encoder,
Siemens Type
6FX201-2, 5V
supply:
500kHz, 32
meters,
shielded, max.;
cable length,
RS-422 (5V)
incremental
encoder, Siemens
Type
6FX201-2, 24V
supply: 500
kHz, 100
meters,
shielded, max.
4/102 Siemens ST 70 · 2005