simatic s7-300 - megaelektrik.net

SIMATIC S7-300
Analog modules
SM 334 analog input/output modules
■ Overview
• Analog inputs and outputs
• For the connection of ana log sensors and actuators
4
■ Technical specifications
6ES7 334-
0CE01-0AA0
6ES7 334-
0KE00-0AB0
Voltages and currents
Load voltage L+
- Rated value (DC) 24 V 24 V
Current consumption
• from load voltage L+ (no load), 110 mA 80 mA
max.
• from backplane bus 5 V DC, max. 55 mA 60 mA
• Power dissipation, typical 3 W 2 W
Connection system
• Requisite front connector 20-pin 20-pin
Analog inputs
• Number of analog inputs 4 4
• Number of analog inputs for 4 2
voltage measurement
• Number of analog inputs for
resistance measurement
4
• Permissible input voltage for the
voltage input (destruction limit),
max.
• Permissible input voltage for the
current input (destruction limit),
max.
20 V;
max. 20V continuous;
75V for
max. 1s (pulse
duty ratio 1:20)
40 mA
20 V;
permanent;
75 V for max.
1s (pulse duty
ratio 1:20)
• Cycle time (all channels) 5 ms; AE+AA 85 ms
Input ranges (rated values),
voltages
- 0 to +10 V Yes Yes
Input ranges (rated values),
currents
- 0 to 20 mA Yes
Input ranges (rated values),
resistances
- 0 to 10000 ohms Yes
Input ranges (rated values),
resistance thermometer
- Pt 100 Yes; climatic
range only
6ES7 334-
0CE01-0AA0
6ES7 334-
0KE00-0AB0
Analog outputs
• Number of analog outputs 2 2
• Length of cable shielded, max 200 m 100 m
• Voltage output, short-circuit Yes
Yes
protection
• Voltage output, short-circuit 11 mA 10 mA
current, max
• Current output, open-circuit 15 V
voltage, max.
Output ranges, voltage
- 0 to 10 V Yes Yes
Output ranges, current
- 0 to 20 mA Yes
Burden resistance (in the nominal
output range)
- at voltage outputs, min. 5 kΩ 2.5 kΩ
- at voltage outputs,
1 µF 1 µF
capacitive load, max.
- at current outputs, max. 300 Ω
- at current outputs,
1 mH
inductive load, max.
Analog value formation
Integration and conversion
time/triggering per channel
- with over-range (bits incl. sign),
max
8 Bit 12 Bit
- Integration time, ms 16,67; 20
Settling time
- for resistive load 0.3 ms 0.8 ms
- for capacitive load 3 ms 0.8 ms
- for inductive load 0.3 ms
Siemens ST 70 · 2005
4/69