simatic s7-300 - megaelektrik.net

SIMATIC S7-300
Digital modules
SM 323/SM 327 digital input/output modules
■ Overview
• Digital inputs and outputs
• For connecting standard switches, two-wire proximity
switches (BERO), solenoid valves, contactors, low-power
motors, lamps and motor starters
4
■ Technical specifications
6ES7 323-1BH01-0AA0 6ES7 323-1BL00-0AA0 6ES7 327-1BH00-0AB0
Voltages and currents
Load voltage L+
- Rated value (DC) 24 V 24 V 24 V
Current consumption
• from load voltage L+ (no load),
max.
40 mA 80 mA 20 mA
• from backplane bus 5 V DC, max. 40 mA 80 mA 60 mA
• Power dissipation, typical 3.5 W 6.5 W 3 W
Connection system
• Requisite front connector 20-pin 40-pin 20-pin
Clock synchronism
• Clock synchronous operation No No No
Digital inputs
• Number of digital inputs 8 16 8; 8 hard-wired and 8 more for
individual parameter assignment
Number of inputs that can be driven
in parallel
- Number of inputs that can be 8 16 16
driven in parallel, up to 40 °C
- Number of inputs that can be 8 8 16
driven in parallel, up to 60 °C
Length of cable
- Length of cable shielded, max 1,000 m 1,000 m 1,000 m
- Length of cable unshielded, max 600 m 600 m 600 m
• Input characteristic to comply with Yes Yes Yes
IEC 1131, Type 1
Input voltage
- Rated value, DC 24 V 24 V 24 V
- for signal "0" -30 to 5 V -30 to 5 V -30 to 5 V
- for signal "1" 13 to 30 V 13 to 30 V 15 to 30 V
Input current
- for 1 signal, typical 7 mA 7 mA 6 mA
Input delay (at rated value of the
input voltage)
• For standard inputs
- at 0 to 1, min. 1.2 ms 1.2 ms 1.2 ms
- at 0 to 1, max. 4.8 ms 4.8 ms 4.8 ms
- at 1 to 0, min 1.2 ms 1.2 ms 1.2 ms
- at 1 to 0, max. 4.8 ms 4.8 ms 4.8 ms
4/52 Siemens ST 70 · 2005