simatic s7-300 - megaelektrik.net
simatic s7-300 - megaelektrik.net simatic s7-300 - megaelektrik.net
■ Technical specifications (continued) Integrated inputs/outputs Default addresses of the integral 6ES7 635- 2EC01-0AE3 6ES7 635- 2EB01-0AE3 - Digital inputs 124.0 to 126.7 124.0 to 126.7 - Digital outputs 124.0 to 125.7 124.0 to 125.7 - Analog inputs 752 to 761 752 to 761 - Analog outputs 752 to 755 752 to 755 Digital inputs • Number of digital inputs 24 24 - which can be used as inputs 16 16 for technological functions Number of inputs that can be driven in parallel • vertical mounting positions - up to 40°C 18 18 - up to 50°C 12 12 • 45°C mounting positions - up to 45°C 12 12 • horizontal mounting positions - up to 40°C 12 12 Length of cable - Length of cable shielded, max. 1,000 m; 100 m for technological functions - Length of cable unshielded, max. 600 m 600 m • Technological function - shielded, max. 50 m; at maximum count frequency - unshielded, max. Unshielded cables are not allowed for technological functions • Standard DI 1,000 m; 100 m for technological functions 50 m; at maximum count frequency Unshielded cables are not allowed for technological functions - shielded, max. 1,000 m 1,000 m - unshielded, max. 600 m 600 m • Input characteristic to comply Yes Yes with IEC 1131, Type 1 Input voltage - Rated value, DC 24 V 24 V - for signal "0" -3 to 5 V -3 to 5 V - for signal "1" 15 to 30 V 15 to 30 V Input current - for 1 signal, typical 7 mA 7 mA Input delay (at rated value of the input voltage) • For standard inputs - Parameterizable Yes; 0.1 / 0.5 / 3 / 5 ms - Rated value 3 ms 3 ms • for counters/technological functions - at 0 to 1, max. 8 µs 8 µs Yes; 0.1 / 0.5 / 3 / 15 ms Digital outputs SIMATIC C7 Control systems 6ES7 635- 2EC01-0AE3 C7-635 6ES7 635- 2EB01-0AE3 • Number of digital outputs 16 16 - of which fast outputs 4 4 • Length of cable shielded, max. 1,000 m 1,000 m • Length of cable unshielded, max. 600 m 600 m • Short-circuit protection of the output • Short-circuit prot ection of the output, response threshold, typical • Limitation of voltage induced on circuit interruption to Yes; clocking electronically 1 A 1 A Yes; clocking electronically L+ (-48 V) L+ (-48 V) • Lamp load, max. 5 W 5 W • Driving a digital input Yes Yes Output voltage - for 1 signal L+ (-0.8 V) L+ (-0.8 V) Output current - for 1 signal rated value 0.5 A 0.5 A - permissible range for signal "1", 5 mA 5 mA min. - permissible range for signal "1", 0.6 A 0.6 A max. - for 1 signal minimum load 5 mA 5 mA current - for 0 signal residual current, max. 0.5 mA 0.5 mA Parallel switching of 2 outputs - to increase power No No - to redundantly drive a load Yes Yes Switching frequency - at resistive load, max. 100 Hz 100 Hz - at inductive load, max. 0.5 Hz 0.5 Hz - at lamp load, max. 100 Hz 100 Hz - of pulse outputs, 2.5 kHz 2.5 kHz at resistive load, max. Summation current of the outputs (per group) • vertical mounting positions - up to 40°C., max. 3 A 3 A - up to 50°C., max. 2 A 2 A • 45°C mounting positions - up to 45°C, max. 2 A 2 A • horizontal mounting positions - up to 40°C., max. 2 A 2 A - up to 40 °C, max. 4 A 4 A - up to 60 °C, max. 2 A 2 A Load impedance range - lower limit 48 Ω 48 Ω - upper limit 4 kΩ 4 kΩ 6 Siemens ST 70 · 2005 6/17
6 SIMATIC C7 Control systems C7-635 ■ Technical specifications (continued) Analog inputs 6ES7 635- 2EC01-0AE3 6ES7 635- 2EB01-0AE3 • Number of analog inputs 4 4 • Number of analog inputs for 4 4 voltage/current measurement • Number of analog inputs for resistance/temperature 1 1 measurement) • Number of analog inputs for 1 1 resistance measurement • Length of cable shielded, max. 100 m 100 m • Permissible input voltage for the voltage input (destruction limit), max. • Permissible input voltage for the current input (destruction limit), max. • Permissible input voltage for the voltage input (destruction limit), max. • Permissible input voltage for the current input (destruction limit), max. • Technical unit for temperature measurement, adjustable 30 V; permanent 2.5 V; permanent, max. 24V transient 0.5 mA; permanent 50 mA; permanent Yes; degrees Celsius / degrees Fahrenheit / Kelvin 30 V; permanent 2.5 V; permanent, max. 24V transient 0.5 mA; permanent 50 mA; permanent Input ranges (rated values), voltages - 0 to +10 V Yes Yes - -10 V to +10 V Yes Yes Input ranges (rated values), currents - 0 to 20 mA Yes Yes - -20 to +20 mA Yes Yes - 4 to 20 mA Yes Yes Input ranges (rated values), resistances - Open-circuit voltage (DC), type 2.5 V 2.5 V - Current measurement, type. 1.8 mA to 3.3 mA - 0 to 600 ohms Yes Yes Input ranges (rated values), resistance thermometer - Pt 100 Yes Yes Characteristic curve linearization - parameterizable Yes; by the software Yes; degrees Celsius / degrees Fahrenheit / Kelvin 1.8 mA to 3.3 mA - for resistance thermometer Pt 100 Pt 100 Temperature compensation - parameterizable No No Yes; by the software 6ES7 635- 2EC01-0AE3 6ES7 635- 2EB01-0AE3 Analog outputs • Number of analog outputs 2 2 • Length of cable shielded, max. 200 m 200 m • Voltage output, short-circuit Yes Yes protection • Voltage output, short-circuit 55 mA 55 mA current, max • Current output, open-circuit 17 V 17 V voltage, max. Output ranges, voltage - 0 to 10 V Yes Yes - -10 to +10 V Yes Yes Output ranges, current - 0 to 20 mA Yes Yes - -20 to +20 mA Yes Yes - 4 to 20 mA Yes Yes Actuator connection - for voltage output 2-wire connection - for voltage output 4-wire connection - for current output 2-wire connection Yes; without cable resistance compensation No Yes Yes; without cable resistance compensation No Yes Burden resistance (in the nominal output range) - at voltage outputs, min. 1 kΩ 1 kΩ - at voltage outputs, 0.1 µF 0.1 µF capacitive load, max. - at current outputs, max. 300 Ω 300 Ω - at current outputs, 0.1 mH 0.1 mH inductive load, max. Destruction limit against voltages and currents applied from outside - Voltages at the outputs against MANA 16 V; permanent - Current (DC), max. 50 mA; permanent Analog value formation • Measuring principle Encoding of instantaneous values (successive approximation) Integration and conversion time/triggering per channel - with over-range (bits incl. sign), max. - Integration time parameterizable Yes; 2.5 / 16.6 / 20 ms - Permissible input frequency, max. 16 V; permanent 50 mA; permanent 12 Bit 12 Bit 400 Hz 400 Hz Encoding of instantaneous values (successive approximation) Yes; 2.5 / 16.6 / 20 ms - Conversion time (per channel) 1 ms 1 ms - Response time of the input filter 0.38 ms 0.38 ms - Basic execution time of the 1 ms 1 ms module (all channels enabled) Settling time - for resistive load 0.6 ms 0.6 ms - for capacitive load 1 ms 1 ms - for inductive load 0.5 ms 0.5 ms 6/18 Siemens ST 70 · 2005
- Page 239 and 240: SIMATIC S7-400 Communication CP 443
- Page 241 and 242: SIMATIC S7-400 Communication CP 443
- Page 243 and 244: SIMATIC S7-400 Communication CP 443
- Page 245 and 246: SIMATIC S7-400 Communication CP 443
- Page 247 and 248: SIMATIC S7-400 Modules for SIMATIC
- Page 249 and 250: SIMATIC S7-400 Modules for SIMATIC
- Page 251 and 252: SIMATIC S7-400 Modules for SIMATIC
- Page 253 and 254: SIMATIC S7-400 Connection methods F
- Page 255 and 256: SIMATIC S7-400 Connection methods 5
- Page 257 and 258: SIMATIC S7-400 Racks Racks ■ Orde
- Page 259 and 260: 5 SIMATIC S7-400 Racks Expansion ra
- Page 261 and 262: SIMATIC S7-400 Interface modules IM
- Page 263 and 264: SIMATIC S7-400 Interface modules IM
- Page 265 and 266: SIMATIC S7-400 Interface modules IM
- Page 267 and 268: SIMATIC S7-400 Interface modules IM
- Page 269 and 270: SIMATIC S7-400 Power supplies Power
- Page 271 and 272: SIMATIC S7-400 Accessories Labeling
- Page 273 and 274: SIMATIC S7-400 5 5/110 Siemens ST 7
- Page 275 and 276: SIMATIC C7 SIMATIC C7 Introduction
- Page 277 and 278: SIMATIC C7 Control systems C7-613 6
- Page 279 and 280: SIMATIC C7 Control systems C7-613 6
- Page 281 and 282: 6 SIMATIC C7 Control systems C7-633
- Page 283 and 284: SIMATIC C7 Control systems C7-633 6
- Page 285 and 286: SIMATIC C7 Control systems C7-633 6
- Page 287 and 288: SIMATIC C7 Control systems C7-635 6
- Page 289: SIMATIC C7 Control systems C7-635 6
- Page 293 and 294: SIMATIC C7 Control systems C7-635 6
- Page 295: SIMATIC C7 Control systems C7-636
6<br />
SIMATIC C7<br />
Control systems<br />
C7-635<br />
■ Technical specifications (continued)<br />
Analog inputs<br />
6ES7 635-<br />
2EC01-0AE3<br />
6ES7 635-<br />
2EB01-0AE3<br />
• Number of analog inputs 4 4<br />
• Number of analog inputs for 4 4<br />
voltage/current measurement<br />
• Number of analog inputs for resistance/temperature<br />
1 1<br />
measurement)<br />
• Number of analog inputs for 1 1<br />
resistance measurement<br />
• Length of cable shielded, max. 100 m 100 m<br />
• Permissible input voltage for the<br />
voltage input (destruction limit),<br />
max.<br />
• Permissible input voltage for the<br />
current input (destruction limit),<br />
max.<br />
• Permissible input voltage for the<br />
voltage input (destruction limit),<br />
max.<br />
• Permissible input voltage for the<br />
current input (destruction limit),<br />
max.<br />
• Technical unit for temperature<br />
measurement, adjustable<br />
30 V;<br />
permanent<br />
2.5 V;<br />
permanent,<br />
max. 24V<br />
transient<br />
0.5 mA;<br />
permanent<br />
50 mA;<br />
permanent<br />
Yes;<br />
degrees Celsius<br />
/ degrees<br />
Fahrenheit /<br />
Kelvin<br />
30 V;<br />
permanent<br />
2.5 V;<br />
permanent,<br />
max. 24V<br />
transient<br />
0.5 mA;<br />
permanent<br />
50 mA;<br />
permanent<br />
Input ranges (rated values),<br />
voltages<br />
- 0 to +10 V Yes Yes<br />
- -10 V to +10 V Yes Yes<br />
Input ranges (rated values),<br />
currents<br />
- 0 to 20 mA Yes Yes<br />
- -20 to +20 mA Yes Yes<br />
- 4 to 20 mA Yes Yes<br />
Input ranges (rated values),<br />
resistances<br />
- Open-circuit voltage (DC), type 2.5 V 2.5 V<br />
- Current measurement, type. 1.8 mA to<br />
3.3 mA<br />
- 0 to 600 ohms Yes Yes<br />
Input ranges (rated values),<br />
resistance thermometer<br />
- Pt 100 Yes Yes<br />
Characteristic curve linearization<br />
- parameterizable Yes;<br />
by the software<br />
Yes;<br />
degrees Celsius<br />
/ degrees<br />
Fahrenheit /<br />
Kelvin<br />
1.8 mA to<br />
3.3 mA<br />
- for resistance thermometer Pt 100 Pt 100<br />
Temperature compensation<br />
- parameterizable No No<br />
Yes;<br />
by the software<br />
6ES7 635-<br />
2EC01-0AE3<br />
6ES7 635-<br />
2EB01-0AE3<br />
Analog outputs<br />
• Number of analog outputs 2 2<br />
• Length of cable shielded, max. 200 m 200 m<br />
• Voltage output, short-circuit Yes<br />
Yes<br />
protection<br />
• Voltage output, short-circuit 55 mA 55 mA<br />
current, max<br />
• Current output, open-circuit 17 V 17 V<br />
voltage, max.<br />
Output ranges, voltage<br />
- 0 to 10 V Yes Yes<br />
- -10 to +10 V Yes Yes<br />
Output ranges, current<br />
- 0 to 20 mA Yes Yes<br />
- -20 to +20 mA Yes Yes<br />
- 4 to 20 mA Yes Yes<br />
Actuator connection<br />
- for voltage output 2-wire<br />
connection<br />
- for voltage output 4-wire<br />
connection<br />
- for current output 2-wire<br />
connection<br />
Yes;<br />
without cable<br />
resistance<br />
compensation<br />
No<br />
Yes<br />
Yes;<br />
without cable<br />
resistance<br />
compensation<br />
No<br />
Yes<br />
Burden resistance<br />
(in the nominal output range)<br />
- at voltage outputs, min. 1 kΩ 1 kΩ<br />
- at voltage outputs,<br />
0.1 µF 0.1 µF<br />
capacitive load, max.<br />
- at current outputs, max. <strong>300</strong> Ω <strong>300</strong> Ω<br />
- at current outputs,<br />
0.1 mH 0.1 mH<br />
inductive load, max.<br />
Destruction limit against voltages<br />
and currents applied from outside<br />
- Voltages at the outputs against<br />
MANA<br />
16 V;<br />
permanent<br />
- Current (DC), max. 50 mA;<br />
permanent<br />
Analog value formation<br />
• Measuring principle<br />
Encoding of<br />
instantaneous<br />
values (successive<br />
approximation)<br />
Integration and conversion<br />
time/triggering per channel<br />
- with over-range (bits incl. sign),<br />
max.<br />
- Integration time parameterizable Yes; 2.5 / 16.6 /<br />
20 ms<br />
- Permissible input frequency,<br />
max.<br />
16 V;<br />
permanent<br />
50 mA;<br />
permanent<br />
12 Bit 12 Bit<br />
400 Hz 400 Hz<br />
Encoding of<br />
instantaneous<br />
values (successive<br />
approximation)<br />
Yes; 2.5 / 16.6 /<br />
20 ms<br />
- Conversion time (per channel) 1 ms 1 ms<br />
- Response time of the input filter 0.38 ms 0.38 ms<br />
- Basic execution time of the 1 ms 1 ms<br />
module (all channels enabled)<br />
Settling time<br />
- for resistive load 0.6 ms 0.6 ms<br />
- for capacitive load 1 ms 1 ms<br />
- for inductive load 0.5 ms 0.5 ms<br />
6/18 Siemens ST 70 · 2005