simatic s7-300 - megaelektrik.net
simatic s7-300 - megaelektrik.net simatic s7-300 - megaelektrik.net
■ Overview SIMATIC S7-400 Communication CP 443-1 Advanced • Connection of SIMATIC S7-4 00 to Industrial Ethernet - 10/100 Mbit/s full/half duplex connection with autosensing - Connection via RJ45 - Multi-protocol operation for ISO, TCP/IP and UDP - Adjustable Keep Alive function • Communication services: - PROFINET IO Controller - PROFINET CBA - ISO, TCP/IP and UDP transport protocols: Multicast for UDP - Programming device/operator panel communication: Cross-network by means of S7 routing - S7 communication - S5-compatible communication - IT communication: HTTP communication supports access to process data through Web browsers; FTP communication supports program-controlled FTP client communication, Access to data blocks through FTP server, Data handling for own file system through FTP, E-mail • IP address assignment via DHCP, simple PC tool or via the user program (e.g. HMI) • Access protection by means of configurable access list • Single-width module with integrated 4-port switch saves space in the rack and control cabinet. Thanks to the integrated autocrossing function, the CP 443-1 Advanced is very well suited for establishing small local networks. • Module replacement without programming device; all information is stored on the C-PLUG (also file system for IT functions). • Extensive diagnostic function s for all modules in the rack • Integration into network ma nagement systems through the support of SNMP V1 MIB-II 5 ■ Technical specifications Data transmission rate 10/100 Mbit/s autosensing Performance data Configuring software STEP7 V5.3 + SP1 1)2) -E-mail Interfaces • 10BaseT, 100BaseTX 4x RJ45 Memory capacity • Flash memory file system Power supply DC +5 V (+/- 5%) from the backplane bus •RAM Current consumption • From backplane bus Max. 1.8 A Power loss 7.25 W Perm. ambient conditions • Operating temperature 0 ×C to +60 ×C • Transport/storage temperature -40 ×C to +70 ×C • Relative humidity Max. 95% at +25 ×C S5-compatible communication Construction (SEND/RECEIVE) • Module format Compact module S7-400, single • Sum of all simultaneously operable width TCP/UDP connections • Dimensions (W x H x D) in mm 25 x 290 x 217 • Useful data • Weight Approx. 750 g -ISO or TCP/IP -UDP PROFINET communication PG/OP communication • Number of PG connections Max. 2 • Number of OP connections Max. 30 S7 communication • Number of connections Max. 128 32 MB, approx. 30 MB of which is freely available to the user 32 MB, approx. 30 MB of which is freely available to the user; additional 512 KB buffered via central backup battery Max. 64 HTTP communication • Number of server connections Max. 4 Multi-protocol operation • Sum of all simultaneously operable Max. 128 connections Max. 8 KB Max. 2 KB Max. 2 KB See http://www.siemens.com/ profinet/ik-info 1) For configuring PROFINET IO 2) For configuring PROFINET CBA, iMap V2.0 is also required Siemens ST 70 · 2005 5/79
SIMATIC S7-400 Communication CP 443-1 Advanced ■ Ordering data Order No. Order No. 5 CP 443-1 Advanced communications processor H) for the connection of SIMATIC S7- 400 to Industrial Ethernet, PROFI- NET IO-Controller, PROFINET CBA, TCP/IP, ISO and UDP; for S7 communication, S5-compatible communication (SEND/RECEIVE) with FETCH/ WRITE, with and without RFC 1006, diagnostic expansions, multicast, clock synchronization via SIMATIC procedure or NTP, access protection via IP access list, FTP client/server, HTTP server, HTML diagnostics, SNMP, DHCP, e-mail, data storage on C-PLUG, 4-port switch on board, initialization via LAN 10/100 Mbit/s; with electronic manual on CD-ROM C-Plug A) Replacement medium for simple replacement of devices in the event of a fault; for storing configuration or engineering and application data, can be used for SIMATIC NET products with C-PLUG slot IE FC RJ45 Plug 180 RJ45 plug-in connector for Industrial Ethernet with a rugged metal housing and integrated insulation displacement contacts for connecting Industrial Ethernet FC installation cables; with 180° cable outlet; for network components and CPs/CPUs with Industrial Ethernet interface • 1 pack = 1 item • 1 pack = 10 items • 1 pack = 50 items 6GK7 443-1EX40-0XE0 6GK1 900-0AB00 Configuring software NCM S7 for Industrial Ethernet CPs for SIMATIC S7; V5.x, operating under STEP 7 V5.x; with electronic manual on CD-ROM, German, English, French, Spanish, Italian Documentation S7-CPs/NCM for Industrial Ethernet and PROFIBUS; manual package for configuring S7-CPs, IE/PB Link and PC-Stations (STEP 7 V5.3) • German •English Software iMap V2.0 for configuring PROFINET CBA, Requirement: Windows 2000 Prof. SP4 or Windows XP Prof. SP1; on PG or PC with Pentium processor, min. 500 MHz; STEP 7, V5.2 SP 1 and higher incl. NCM, SIMATIC NET IE SOFTNET-PG, V6.2 and higher; PN OPC server, V6.2 and higher Type of delivery: German, English with electronic documentation; • Single license • Software update service • Upgrade iMap V2.0 single license Included in the STEP 7 V5.x scope of supply 6GK7 080-0AA01-8AA0 6GK7 080-0AA01-8BA0 6ES7 820-0CC03-0YX0 6ES7 820-0CC01-0YX2 6ES7 820-0CC03-0YX4 6GK1 901-1BB10-2AA0 6GK1 901-1BB10-2AB0 6GK1 901-1BB10-2AE0 A) Subject to export regulations: AL: N and ECCN: EAR99H H) Subject to export regulations: AL: N and ECCN: 5A991 5/80 Siemens ST 70 · 2005
- Page 191 and 192: SIMATIC S7-400 Central processing u
- Page 193 and 194: SIMATIC S7-400 Central processing u
- Page 195 and 196: SIMATIC S7-400 Digital modules Digi
- Page 197 and 198: SIMATIC S7-400 Digital modules Digi
- Page 199 and 200: SIMATIC S7-400 Digital modules Digi
- Page 201 and 202: SIMATIC S7-400 Analog modules Analo
- Page 203 and 204: SIMATIC S7-400 Analog modules Analo
- Page 205 and 206: SIMATIC S7-400 Analog modules Analo
- Page 207 and 208: SIMATIC S7-400 Analog modules Analo
- Page 209 and 210: SIMATIC S7-400 Function modules FM
- Page 211 and 212: 5 SIMATIC S7-400 Function modules F
- Page 213 and 214: SIMATIC S7-400 Function modules Cam
- Page 215 and 216: SIMATIC S7-400 Function modules FM
- Page 217 and 218: SIMATIC S7-400 Function modules FM
- Page 219 and 220: SIMATIC S7-400 Function modules FM
- Page 221 and 222: SIMATIC S7-400 Function modules FM
- Page 223 and 224: SIMATIC S7-400 Function modules EXM
- Page 225 and 226: SIMATIC S7-400 Function modules EXM
- Page 227 and 228: SIMATIC S7-400 Function modules Acc
- Page 229 and 230: SIMATIC S7-400 Function modules Acc
- Page 231 and 232: SIMATIC S7-400 SIMATIC S5 intellige
- Page 233 and 234: SIMATIC S7-400 Communication CP 440
- Page 235 and 236: SIMATIC S7-400 Communication CP 441
- Page 237 and 238: SIMATIC S7-400 Communication CP 443
- Page 239 and 240: SIMATIC S7-400 Communication CP 443
- Page 241: SIMATIC S7-400 Communication CP 443
- Page 245 and 246: SIMATIC S7-400 Communication CP 443
- Page 247 and 248: SIMATIC S7-400 Modules for SIMATIC
- Page 249 and 250: SIMATIC S7-400 Modules for SIMATIC
- Page 251 and 252: SIMATIC S7-400 Modules for SIMATIC
- Page 253 and 254: SIMATIC S7-400 Connection methods F
- Page 255 and 256: SIMATIC S7-400 Connection methods 5
- Page 257 and 258: SIMATIC S7-400 Racks Racks ■ Orde
- Page 259 and 260: 5 SIMATIC S7-400 Racks Expansion ra
- Page 261 and 262: SIMATIC S7-400 Interface modules IM
- Page 263 and 264: SIMATIC S7-400 Interface modules IM
- Page 265 and 266: SIMATIC S7-400 Interface modules IM
- Page 267 and 268: SIMATIC S7-400 Interface modules IM
- Page 269 and 270: SIMATIC S7-400 Power supplies Power
- Page 271 and 272: SIMATIC S7-400 Accessories Labeling
- Page 273 and 274: SIMATIC S7-400 5 5/110 Siemens ST 7
- Page 275 and 276: SIMATIC C7 SIMATIC C7 Introduction
- Page 277 and 278: SIMATIC C7 Control systems C7-613 6
- Page 279 and 280: SIMATIC C7 Control systems C7-613 6
- Page 281 and 282: 6 SIMATIC C7 Control systems C7-633
- Page 283 and 284: SIMATIC C7 Control systems C7-633 6
- Page 285 and 286: SIMATIC C7 Control systems C7-633 6
- Page 287 and 288: SIMATIC C7 Control systems C7-635 6
- Page 289 and 290: SIMATIC C7 Control systems C7-635 6
- Page 291 and 292: 6 SIMATIC C7 Control systems C7-635
SIMATIC S7-400<br />
Communication<br />
CP 443-1 Advanced<br />
■ Ordering data Order No. Order No.<br />
5<br />
CP 443-1 Advanced<br />
communications processor H)<br />
for the connection of SIMATIC S7-<br />
400 to Industrial Ether<strong>net</strong>, PROFI-<br />
NET IO-Controller, PROFINET<br />
CBA, TCP/IP, ISO and UDP;<br />
for S7 communication,<br />
S5-compatible communication<br />
(SEND/RECEIVE) with FETCH/<br />
WRITE, with and without RFC<br />
1006, diagnostic expansions,<br />
multicast, clock synchronization<br />
via SIMATIC procedure or NTP,<br />
access protection via IP access<br />
list, FTP client/server, HTTP<br />
server, HTML diagnostics, SNMP,<br />
DHCP, e-mail, data storage on<br />
C-PLUG, 4-port switch on board,<br />
initialization via LAN 10/100<br />
Mbit/s; with electronic manual on<br />
CD-ROM<br />
C-Plug A)<br />
Replacement medium for simple<br />
replacement of devices in the<br />
event of a fault; for storing<br />
configuration or engineering and<br />
application data, can be used for<br />
SIMATIC NET products with<br />
C-PLUG slot<br />
IE FC RJ45 Plug 180<br />
RJ45 plug-in connector for<br />
Industrial Ether<strong>net</strong> with a rugged<br />
metal housing and integrated<br />
insulation displacement contacts<br />
for connecting Industrial Ether<strong>net</strong><br />
FC installation cables; with 180°<br />
cable outlet; for <strong>net</strong>work<br />
components and CPs/CPUs with<br />
Industrial Ether<strong>net</strong> interface<br />
• 1 pack = 1 item<br />
• 1 pack = 10 items<br />
• 1 pack = 50 items<br />
6GK7 443-1EX40-0XE0<br />
6GK1 900-0AB00<br />
Configuring software NCM S7<br />
for Industrial Ether<strong>net</strong> CPs for<br />
SIMATIC S7; V5.x, operating<br />
under STEP 7 V5.x;<br />
with electronic manual<br />
on CD-ROM,<br />
German, English, French,<br />
Spanish, Italian<br />
Documentation S7-CPs/NCM<br />
for Industrial Ether<strong>net</strong> and<br />
PROFIBUS; manual package for<br />
configuring S7-CPs, IE/PB Link<br />
and PC-Stations (STEP 7 V5.3)<br />
• German<br />
•English<br />
Software iMap V2.0<br />
for configuring<br />
PROFINET CBA,<br />
Requirement:<br />
Windows 2000 Prof. SP4 or<br />
Windows XP Prof. SP1;<br />
on PG or PC with Pentium processor,<br />
min. 500 MHz; STEP 7, V5.2<br />
SP 1 and higher incl. NCM,<br />
SIMATIC NET IE SOFTNET-PG,<br />
V6.2 and higher; PN OPC server,<br />
V6.2 and higher<br />
Type of delivery:<br />
German, English with electronic<br />
documentation;<br />
• Single license<br />
• Software update service<br />
• Upgrade iMap V2.0<br />
single license<br />
Included in the STEP 7 V5.x<br />
scope of supply<br />
6GK7 080-0AA01-8AA0<br />
6GK7 080-0AA01-8BA0<br />
6ES7 820-0CC03-0YX0<br />
6ES7 820-0CC01-0YX2<br />
6ES7 820-0CC03-0YX4<br />
6GK1 901-1BB10-2AA0<br />
6GK1 901-1BB10-2AB0<br />
6GK1 901-1BB10-2AE0<br />
A) Subject to export regulations: AL: N and ECCN: EAR99H<br />
H) Subject to export regulations: AL: N and ECCN: 5A991<br />
5/80 Siemens ST 70 · 2005