simatic s7-300 - megaelektrik.net

■ Overview
SIMATIC S7-400
Communication
CP 443-1 Advanced
• Connection of SIMATIC S7-4 00 to Industrial Ethernet
- 10/100 Mbit/s full/half duplex connection with autosensing
- Connection via RJ45
- Multi-protocol operation for ISO, TCP/IP and UDP
- Adjustable Keep Alive function
• Communication services:
- PROFINET IO Controller
- PROFINET CBA
- ISO, TCP/IP and UDP transport protocols:
Multicast for UDP
- Programming device/operator panel communication:
Cross-network by means of S7 routing
- S7 communication
- S5-compatible communication
- IT communication:
HTTP communication supports access to process data
through Web browsers;
FTP communication supports program-controlled FTP client
communication,
Access to data blocks through FTP server,
Data handling for own file system through FTP, E-mail
• IP address assignment via DHCP, simple PC tool or via the
user program (e.g. HMI)
• Access protection by means of configurable access list
• Single-width module with integrated 4-port switch saves space
in the rack and control cabinet. Thanks to the integrated
autocrossing function, the CP 443-1 Advanced is very well
suited for establishing small local networks.
• Module replacement without programming device; all
information is stored on the C-PLUG (also file system for
IT functions).
• Extensive diagnostic function s for all modules in the rack
• Integration into network ma nagement systems through the
support of SNMP V1 MIB-II
5
■ Technical specifications
Data transmission rate
10/100 Mbit/s autosensing
Performance data
Configuring software STEP7 V5.3 + SP1 1)2) -E-mail
Interfaces
• 10BaseT, 100BaseTX
4x RJ45
Memory capacity
• Flash memory file system
Power supply
DC +5 V (+/- 5%) from the backplane
bus
•RAM
Current consumption
• From backplane bus
Max. 1.8 A
Power loss
7.25 W
Perm. ambient conditions
• Operating temperature 0 ×C to +60 ×C
• Transport/storage temperature -40 ×C to +70 ×C
• Relative humidity Max. 95% at +25 ×C
S5-compatible communication
Construction
(SEND/RECEIVE)
• Module format
Compact module S7-400, single • Sum of all simultaneously operable
width
TCP/UDP connections
• Dimensions (W x H x D) in mm 25 x 290 x 217
• Useful data
• Weight
Approx. 750 g
-ISO or TCP/IP
-UDP
PROFINET communication
PG/OP communication
• Number of PG connections Max. 2
• Number of OP connections Max. 30
S7 communication
• Number of connections Max. 128
32 MB, approx. 30 MB of which
is freely available to the user
32 MB, approx. 30 MB of which
is freely available to the user;
additional 512 KB buffered via
central backup battery
Max. 64
HTTP communication
• Number of server connections Max. 4
Multi-protocol operation
• Sum of all simultaneously operable Max. 128
connections
Max. 8 KB
Max. 2 KB
Max. 2 KB
See http://www.siemens.com/
profinet/ik-info
1) For configuring PROFINET IO 2) For configuring PROFINET CBA, iMap V2.0 is also required
Siemens ST 70 · 2005
5/79