simatic s7-300 - megaelektrik.net

SIMATIC S7-400
Communication
CP 443-1
■ Overview
• Connection of SIMATIC S7-400 to Industrial Ethernet
- 10/100 Mbit/s full/half duplex connection with autosensing
for automatic switchover between AUI, ITP and RJ45 interface
- Universal connection options for ITP, RJ45 and AUI
- Multi-protocol operation with ISO, TCP/IP and UDP transport
protocol
- Adjustable Keep Alive function
• Communication services:
- ISO, TCP/IP and UDP transport protocols
- PG/OP communication
- S7 communication
- S5-compatible communication
• Multicast for UPD
• Cross-network programming device/operator panel
communication through S7 routing
• Remote programming and init ial startup via the network
• Access protection by means of configurable access list
5
■ Technical specifications
Data transmission rate
Interfaces
• Connection to Industrial Ethernet
- AUI (10 Mbit/s)
- ITP (10/100 Mbit/s)
• 10BaseT, 100BaseTX
Current consumption
• From +5 V DC ( ± 5%)
• From 24 V DC ( ± 5%)
Power loss
Perm. environmental conditions
• Operating temperature
10/100 Mbit/s autosensing
15-pin Sub-D connector
RJ45
Approx. 1.4 A
Typ. 220 mA,
Max. 350 mA (depending on the
interface used)
8.6 W
0°C to +60°C
• Transport/storage temperature -40 °C to +70 °C
• Relative humidity Max. 95% at +25 °C
Design
• Module format
Compact module S7-400,
single width
• Dimensions (W x H x D) in mm 25 x 290 x 210
• Weight
Approx. 700 g
Configuration software
NCM S7 for Industrial Ethernet
(included in the scope of
supply of STEP 7 V5.x)
Performance data
S5-compatible communication
(SEND/RECEIVE)
• Sum of all simultaneously operable Max. 64
ISO/TCP/UDP connections
• Number of useful data ISO or Max. 8 Kbytes
TCP/IP
• Number of useful data UDP Max. 2 Kbytes
S7 communication
• Number of connections 1) Max. 48
Multi-protocol operation
• Sum of all simultaneously
Max. 64
operable connections
1) Use depends on performance of used S7-CPU/FM
Siemens ST 70 · 2005
5/77