simatic s7-300 - megaelektrik.net
simatic s7-300 - megaelektrik.net simatic s7-300 - megaelektrik.net
■ Technical specifications (continued) 6ES7 317- 2EJ10-0AB0 6ES7 317- 6TJ10-0AB0 Digital outputs • Number of digital outputs 8 • Functions for technological functions, e.g. rapid cam switching signals • Length of cable shielded, max. 1,000 m • Length of cable unshielded, max. 600 m • Short-circuit protection of the output Yes • Limitation of voltage induced on 2L+ (-48 V) circuit interruption to • Lamp load, max. 5 W • Driving a digital input No Output voltage - for 0 signal (DC), max. 3 V - for 1 signal 2L+ (-2.5 V) Output current - for 1 signal rated value 0.5 A - for 1 signal permissible range for 5 mA 0 to 60 °C, min. - for 1 signal permissible range for 0.6 A 0 to 60 °C, max. - for 0 signal residual current, max. 0.3 mA Parallel switching of 2 outputs - to increase power No - to redundantly drive a load No Switching frequency - at resistive load, max. 100 Hz - at inductive load, max. 0.2 Hz; to IEC 947-5-1, DC13 - at lamp load, max. 100 Hz Summation current of the outputs (per group) • horizontal mounting positions - up to 40°C., max. 4 A - up to 60°C., max. 3 mA - up to 40°C., max. 3 mA Load impedance range - lower limit 48 Ω - upper limit 4 kΩ Sensor Connectable encoders - 2-wire BEROS No Potentials/ electrical isolation Digital output functions - between the channels and the backplane bus Digital input functions - between the channels and the backplane bus Yes Yes SIMATIC S7-300 Central processing units CPU 312C to CPU 317F-2 DP 6ES7 317- 2EJ10-0AB0 6ES7 317- 6TJ10-0AB0 Dimensions and weight • Weight, approx. 460 g 750 g • Width 80 mm 160 mm • Height 125 mm 125 mm •Depth 130 mm 130 mm Product version • Associated programming package 6ES7 315- 6FF01-0AB0 STEP 7 as of V 5.1 + SP 6 6ES7 317- 6FF00-0AB0 STEP 7 as of V 5.2 + SP1; S7 Distributed Safety as of V5.2 + SP1 Supply voltages Rated value -24 V DC Yes Yes - permissible range, 20.4 V 20.4 V lower limit (DC) - permissible range, upper limit (DC) 28.8 V 28.8 V Current consumption • Inrush current, typ. 2.5 A 2.5 A •I²t 0.5 A²s 0.5 A²s • Power dissipation, typical 2.5 W 2.5 W Memory/backup Memory • Working memory - integral 192 KByte; Compared with a standard program the number of F statements is limited because of the F-specific overheads; depending on the method of programming, about 36 K F statements are possible. 512 KByte; of which max. 256kB for retentive DB - expandable No No • Load memory - pluggable (MMC) Yes Yes - pluggable (MMC), max. 8 MByte 8 MByte Backup - available Yes; guaranteed by MMC (maintenancefree) Yes; guaranteed by MMC (maintenancefree) 4 Siemens ST 70 · 2005 4/31
4 SIMATIC S7-300 Central processing units CPU 312C to CPU 317F-2 DP ■ Technical specifications (continued) 6ES7 315- 6FF01-0AB0 CPU/blocks DB - Number, max. 1,023; DB 0 reserved 6ES7 317- 6FF00-0AB0 2,047; DB 0 reserved - Size, max. 16 KByte 64 KByte FB - Number, max. 2,048; see instruction list 2,048; see instruction list - Size, max. 16 KByte 64 KByte FC - Number, max. 2,048; See instruction list 2,048; see instruction list - Size, max. 16 KByte 64 KByte OB - Number, max. see instruction list see instruction list - Size, max. 16 KByte 64 KByte Nesting depth - per priority class 8 8 - additional levels within an error OB 4 4 CPU/processing times • for bit instruction, min. 0.1 µs 0.1 µs • for word instruction, min. 0.2 µs 0.1 µs • for integer math, min. 2 µs 0.2 µs • for floating-point math, min. 6 µs 2 µs Timers/counters and their retentive characteristics S7 counter -Number 256 512 • of which retentive without battery - adjustable Yes Yes • Counting range - lower limit 0 0 - upper limit 999 999 IEC counter - available Yes Yes - Type SFB SFB S7 times -Number 256 512 • Retentivity - adjustable Yes Yes - preset No retention No retention • Timing range - lower limit 10 ms 10 ms - upper limit 9,990 s 9,990 s IEC timer - available Yes Yes - Type SFB SFB 6ES7 315- 6FF01-0AB0 6ES7 317- 6FF00-0AB0 Data areas and their retentive characteristics Flags - Number 2,048 Byte 4,096 Byte - adjustable retentivity Yes; MB 0 to MB 2047 - Number of clock memories 8; 1 memory byte Data blocks - Number, max. 1,023; DB 0 reserved Yes; MB 0 to MB 4095 8; 1 memory byte 2,047; DB 0 reserved - Size, max. 16 KByte 64 KByte Local data - per priority class, max. 1,024 Byte 1,024 Byte Address area I/O address area - Inputs 2 KByte 8 KByte -Outputs 2 KByte 8 KByte • of which distributed - Inputs 2 KByte 8 KByte -Outputs 2 KByte 8 KByte Process image - Inputs 384 Byte 1,024 Byte -Outputs 384 Byte 1,024 Byte Digital channels - Inputs 16,384 65,536 -Outputs 16,384 65,536 - Inputs, of which central 1,024 1,024 - Outputs, of which central 1,024 1,024 Analog channels - Inputs 1,024 1,024 -Outputs 1,024 1,024 - Inputs, of which central 256 256 - Outputs, of which central 256 256 Configuration • Racks, max. 4 4 • Modules per rack, max. 8 8 Number of DP masters - integral 1 2 - via CP 1 2 Number of FMs and CPs that can be operated (recommendation) -FM 8 8 - CP, point-to-point 8 8 - CP, LAN 10 10 4/32 Siemens ST 70 · 2005
- Page 1 and 2: 4 SIMATIC S7-300 Central processing
- Page 3 and 4: SIMATIC S7-300 Central processing u
- Page 5 and 6: SIMATIC S7-300 Central processing u
- Page 7 and 8: SIMATIC S7-300 Central processing u
- Page 9 and 10: SIMATIC S7-300 Central processing u
- Page 11 and 12: SIMATIC S7-300 Central processing u
- Page 13 and 14: SIMATIC S7-300 Central processing u
- Page 15 and 16: SIMATIC S7-300 Central processing u
- Page 17 and 18: SIMATIC S7-300 Central processing u
- Page 19 and 20: SIMATIC S7-300 Central processing u
- Page 21 and 22: 4 SIMATIC S7-300 Central processing
- Page 23: 4 SIMATIC S7-300 Central processing
- Page 27 and 28: 4 SIMATIC S7-300 Central processing
- Page 29 and 30: SIMATIC S7-300 Central processing u
- Page 31 and 32: SIMATIC S7-300 SIPLUS central proce
- Page 33 and 34: SIMATIC S7-300 Digital modules SM 3
- Page 35 and 36: SIMATIC S7-300 Digital modules SM 3
- Page 37 and 38: SIMATIC S7-300 Digital modules SM 3
- Page 39 and 40: SIMATIC S7-300 Digital modules SM 3
- Page 41 and 42: SIMATIC S7-300 Digital modules SM 3
- Page 43 and 44: SIMATIC S7-300 Digital modules SM 3
- Page 45 and 46: SIMATIC S7-300 Digital modules SM 3
- Page 47 and 48: SIMATIC S7-300 Digital modules SM 3
- Page 49 and 50: 4 SIMATIC S7-300 SIPLUS digital mod
- Page 51 and 52: SIMATIC S7-300 SIPLUS digital modul
- Page 53 and 54: SIMATIC S7-300 Analog modules SM 33
- Page 55 and 56: SIMATIC S7-300 Analog modules SM 33
- Page 57 and 58: SIMATIC S7-300 Analog modules SM 33
- Page 59 and 60: SIMATIC S7-300 Analog modules SM 33
- Page 61 and 62: SIMATIC S7-300 Analog modules SM 33
- Page 63 and 64: 4 SIMATIC S7-300 Analog modules SM
- Page 65 and 66: 4 SIMATIC S7-300 Analog modules SM
- Page 67 and 68: SIMATIC S7-300 SIPLUS analog module
- Page 69 and 70: SIMATIC S7-300 SIPLUS analog module
- Page 71 and 72: SIMATIC S7-300 F digital / analog m
- Page 73 and 74: 4 SIMATIC S7-300 F digital / analog
■ Technical specifications (continued)<br />
6ES7 317-<br />
2EJ10-0AB0<br />
6ES7 317-<br />
6TJ10-0AB0<br />
Digital outputs<br />
• Number of digital outputs 8<br />
• Functions<br />
for technological<br />
functions,<br />
e.g. rapid cam<br />
switching signals<br />
• Length of cable shielded, max.<br />
1,000 m<br />
• Length of cable unshielded, max.<br />
600 m<br />
• Short-circuit protection of the output<br />
Yes<br />
• Limitation of voltage induced on<br />
2L+ (-48 V)<br />
circuit interruption to<br />
• Lamp load, max.<br />
5 W<br />
• Driving a digital input<br />
No<br />
Output voltage<br />
- for 0 signal (DC), max. 3 V<br />
- for 1 signal<br />
2L+ (-2.5 V)<br />
Output current<br />
- for 1 signal rated value 0.5 A<br />
- for 1 signal permissible range for<br />
5 mA<br />
0 to 60 °C, min.<br />
- for 1 signal permissible range for<br />
0.6 A<br />
0 to 60 °C, max.<br />
- for 0 signal residual current, max.<br />
0.3 mA<br />
Parallel switching of 2 outputs<br />
- to increase power No<br />
- to redundantly drive a load<br />
No<br />
Switching frequency<br />
- at resistive load, max. 100 Hz<br />
- at inductive load, max. 0.2 Hz; to<br />
IEC 947-5-1,<br />
DC13<br />
- at lamp load, max.<br />
100 Hz<br />
Summation current of the outputs<br />
(per group)<br />
• horizontal mounting positions<br />
- up to 40°C., max. 4 A<br />
- up to 60°C., max. 3 mA<br />
- up to 40°C., max.<br />
3 mA<br />
Load impedance range<br />
- lower limit 48 Ω<br />
- upper limit<br />
4 kΩ<br />
Sensor<br />
Connectable encoders<br />
- 2-wire BEROS No<br />
Potentials/ electrical isolation<br />
Digital output functions<br />
- between the channels and the<br />
backplane bus<br />
Digital input functions<br />
- between the channels and the<br />
backplane bus<br />
Yes<br />
Yes<br />
SIMATIC S7-<strong>300</strong><br />
Central processing units<br />
CPU 312C to CPU 317F-2 DP<br />
6ES7 317-<br />
2EJ10-0AB0<br />
6ES7 317-<br />
6TJ10-0AB0<br />
Dimensions and weight<br />
• Weight, approx. 460 g 750 g<br />
• Width 80 mm 160 mm<br />
• Height 125 mm 125 mm<br />
•Depth 130 mm 130 mm<br />
Product version<br />
• Associated programming<br />
package<br />
6ES7 315-<br />
6FF01-0AB0<br />
STEP 7 as of V<br />
5.1 + SP 6<br />
6ES7 317-<br />
6FF00-0AB0<br />
STEP 7<br />
as of V 5.2 +<br />
SP1;<br />
S7 Distributed<br />
Safety as of<br />
V5.2 + SP1<br />
Supply voltages<br />
Rated value<br />
-24 V DC Yes Yes<br />
- permissible range,<br />
20.4 V 20.4 V<br />
lower limit (DC)<br />
- permissible range,<br />
upper limit (DC)<br />
28.8 V 28.8 V<br />
Current consumption<br />
• Inrush current, typ. 2.5 A 2.5 A<br />
•I²t 0.5 A²s 0.5 A²s<br />
• Power dissipation, typical 2.5 W 2.5 W<br />
Memory/backup<br />
Memory<br />
• Working memory<br />
- integral 192 KByte;<br />
Compared with<br />
a standard<br />
program the<br />
number of<br />
F statements is<br />
limited because<br />
of the F-specific<br />
overheads;<br />
depending on<br />
the method of<br />
programming,<br />
about 36 K F<br />
statements are<br />
possible.<br />
512 KByte;<br />
of which max.<br />
256kB for<br />
retentive DB<br />
- expandable No No<br />
• Load memory<br />
- pluggable (MMC) Yes Yes<br />
- pluggable (MMC), max. 8 MByte 8 MByte<br />
Backup<br />
- available Yes; guaranteed<br />
by MMC<br />
(maintenancefree)<br />
Yes; guaranteed<br />
by MMC<br />
(maintenancefree)<br />
4<br />
Siemens ST 70 · 2005<br />
4/31