FlowCERT

Parameter Listing and Descriptions
Application Parameters
Operation
P100 Mode of Operation
This parameter sets the mode of operation, when in run mode, and can be set
to one of the following:
Option
Description
1 = Distance (Default) Display shows the distance from the
transducer face to the surface.
2 = Level Display shows how full the vessel is.
3 = Space Display shows how empty a vessel is.
4 = OCM Head Display shows how high the head is.
5 = OCM Flow Display shows the instantaneous flow.
P101 Xducer (Transducer)
This parameter should be set to the transducer being used with the unit, and
can be set to one of the following:
Option
0=Auxiliary
Description
Use an alternative mA input device to provide
level input e.g. pressure transducer.
1 = dBMach3 Transducer is a dBMach3 Range 0.0 to 2.425
2 = dB6 Transducer is a dB6. Range 0.3 to 6.00 metres
3= dB10 Transducer is a dB10. Range 0.3 to 10.00 metres
4= dB15 Transducer is a dB15. Range 0.5 to 15.00 metres
7 = dBS6 Transducer is a dBS6. Range 0.2 to 6.00 metres
9 = Duet (Default) Transducer is a Duet. Range 0.3 to 2.000 metres
P102 Material
This parameter should be set to the type of material being monitored.
Option
Description
1 = Liquid (Default) Use for liquids and flat solid materials
2 = Solid Solid material that is heaped or at an angle
3 = Closed Tank Use for applications within a closed tank or
where a secondary echo response may
become focussed to create a larger echo
than the first.
Page 89