FlowCERT

Wait …..
Parameter Default Description
P101
9 = DUET Type of Transducer to be used.
Transducer
P706
Volume Units
1 = Litres Units of flow as on display and used
P707
Time Units
P104
Measnt Units
P105
Empty Level
P703
Minimum
Head
P704
Max Head
P824
Totaliser
Enable
P816
Totaliser ( R )
for calculations.
1=litres
3=cubic feet
5=US gallons
2 = cubic metres
4 = UK gallons
6 = Mil.USG
1 = per second Units of time that volume units will
be displayed and calculated in.
1= units/sec. 2= units/min.
3= units/hour 4= units/day
1 = metres Units used to enter dimensions, and
displayed where appropriate.
1 = metres 2 = centimetres
3 = millimetres 4 = feet
5 = inches
2.000 m Distance from the face of the
transducer (lower transducer on
DUET) or the end of transducer horn
(dB Mach 3), to the material at the
bottom of the measuring element.
0.000m Distance from empty point (P105) to
zero flow.
1.700m Distance from zero flow to max
flow. It should be noted that any
change to P704 updates P106 Span
and vice versa.
1=On Enables the flow totaliser, P820,
options are 0=Off, 1=On. Note this
totaliser can be viewed during run
via the totaliser “Hot Key” It can be
reset but only via P820, whilst in
“program mode”.
0=No
Enables the totaliser to be displayed
in the auxiliary display whilst in “run
mode”. Note this totaliser is
“resettable”, whilst in “run mode”,
via the totaliser hot key.
Page 49