FlowCERT

Location
All electronic products are susceptible to electrostatic
shock, so follow proper grounding procedures during
installation.
FlowCERT must be mounted in a non-hazardous (safe) area, and the
transducer fitted in the hazardous area.
When choosing a location to mount the enclosure, bear in mind the following:
• Ensure that the FlowCERT is installed in a “Safe”, non-hazardous,
area.
• For a clear view of the LCD display it is recommended that it is
mounted at eye level.
• The mounting surface is vibration-free.
FM APPROVED TRANSDUCERS
Class I, Div. 1, Group A, B, C & D
Class II, Div. 1, Group E, F & G
• The ambient temperature is between -20ºC and 50ºC.
Page 8
• There should be no high voltage cables or inverters close by.