FlowCERT

Digital output
Volt free contacts, number and rating
Display
Full Duplex RS232
5 form "C" (SPDT) rated at 5A at
115V/240V AC
6 digits plus 12 character text, plus
bargraph with direction indicators,
remote communicator identifier, and
program/run/test mode indicators
Analogue Input
0-20 or 4-20 mA Isolated (floating) input (to 150V)
4-20mA or 0-20 mA source or sink,
open circuit voltage (source) 33V,
22V at 4mA, 14V at 20mA
(user programmable and adjustable)
0.1% resolution
Velocity input
Speedy velocity sensor
(for full specification of
Speedy refer to
Chapter 3 Speedy Velocity Sensor)
Programming
On-board programming
PC programming
Programming security
Programmed data integrity
Supply
Power supply
Fuses
via RS 485 digital communications
interface
By integral keypad
via RS232
Via passcode (user selectable and
adjustable)
Via non-volatile RAM, plus backup
115V ac + 5% / -10% 50/60 Hz,
230V ac + 5% / -10% 50/60 Hz,
dc 22 - 28V
10W maximum power (typically 6W)
100 mA at 210-240 VAC
200 mA at 105-120 VAC
Pulsar Process Measurement Limited operates a policy of constant development and
improvement and reserve the right to amend technical details as necessary.
Page 6