FlowCERT

Product Specification
Physical
Wall Mount
Outside dimensions
Weight
Enclosure material/description
235 x 184 x 120 mm
(9.25 x 7.24 x 4.72 inch)
Nominal 1 kg (2.2 lbs)
Polycarbonate, flame resistant to
UL91
Cable entry detail 10 cable entry knock outs, 1 x M16,
5 x M20 underside,
4 x 18mm dia (PG11) at rear
Transducer cable extensions
Maximum separation
2-core screened
1000 m (3,280 ft)
Environmental
IP Rating (Wall) IP65 (NEMA 4X)
Max. & min. temperature (electronics)
-20 ºC to +50 ºC (-4˚F to +120˚F)
Flammable atmosphere approval
Safe area: compatible with approved
dB transducers (see transducer spec'
sheet)
CE approval EMC approval to BS EN 50081-1:1992
for emissions and BS EN50082-
2:1995 for immunity,
and to BS EN61010-1:1993 for low
voltage directive
Performance
Accuracy
Resolution
Max. range
Min. range
Rate response
Dependant on application and sensor
used, typically with standard ultrasonic
transducer, 0.25% of the measured
range or 6 mm (0.24") (whichever is
greater). DUET 0.025% of Max. range.
Dependant on application and sensor
used, typically with standard ultrasonic
transducer, 0.1% of the measured
range or 2 mm (0.08") (whichever is
greater). DUET 0.1 mm.
Dependant on application and
transducer (maximum 15m (49ft)
dB15)
Dependent upon application and
transducer (minimum zero dB Mach3)
fully adjustable
Echo Processing
Description
Outputs
Analogue output (x2)
DATEM (Digital Adaptive Tracking of
Echo Movement)
Isolated (floating) output (to 150V) of
4-20 mA or 0-20 mA into 500Ω (user
programmable and adjustable) 1µA
resolution
Page 5