FlowCERT
Flow Cert Second Edition.pdf - Pulsar Process Measurement
Flow Cert Second Edition.pdf - Pulsar Process Measurement
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
P814 Miscellaneous Messages<br />
This parameter determines whether notification messages are displayed on<br />
the auxiliary line of the display in run mode when a miscellaneous relay is<br />
switched on or off. The message is in the form “Clock ON”.<br />
Option<br />
Description<br />
0 = No (Default) Misc. messages will not be displayed<br />
1 = Yes Misc. messages will be displayed<br />
P815 Auxiliary Source<br />
Option<br />
Description<br />
0 = Off (Default) Auxiliary display not used to display<br />
measurement readings<br />
1 = Velocity Instantaneous Velocity measurement will be<br />
displayed<br />
P816 Totaliser ( R )<br />
This parameter determines whether or not the resettable totaliser will be<br />
displayed in the auxiliary line of the display in run mode. When selected the<br />
auxiliary display will scroll between the resettable totaliser and the totaliser<br />
units selected. Default = 0 (Off).<br />
The resettable totaliser can be reset whilst in run mode via the “Totaliser”<br />
hot key by pressing “0” whilst Total (R) is displayed.<br />
Totaliser<br />
P820 Totaliser<br />
Displays the current value of the, non-resettable totaliser. During run mode<br />
this totaliser can be viewed via the “Totaliser” hot key, . Unlike the<br />
resettable totaliser this totaliser cannot be reset whilst in run mode, it can<br />
however be reset whilst in program mode by accessing P820 Totaliser and<br />
entering zero.<br />
P821 Totaliser( R )<br />
Displays the current value of the, resettable totaliser. This totaliser can be<br />
allocated to appear, during run mode, on the auxiliary display line (P816)<br />
or alternatively via the “Totaliser” hot key.<br />
Page 126