Deltabar S PMD70/75 FMD76/77/78
Deltabar S, PMD70, PMD75, FMD76, FMD77, FMD78 - from AoteWell
Deltabar S, PMD70, PMD75, FMD76, FMD77, FMD78 - from AoteWell
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
www.aotewell.com www.fa-market.com info@aotewell.com<br />
<strong>Deltabar</strong> S<br />
<strong>PMD70</strong> (continued) 50 Calibration; Unit:<br />
1 Nominal range; mbar/bar<br />
2 Nominal range; kPa/MPa<br />
3 Nominal range; mmH 2 O/mH 2 O<br />
4 Nominal range; inH 2 O/ftH 2 O<br />
6 Nominal range; psi<br />
8 Configured for Deltatop; see additional specification<br />
B Customer-specific; see additional specification<br />
C Factory calibration certificate, 5-point; see additional specification<br />
D DKD certificate; see additional specification<br />
K Platinum; see additional specification<br />
L Platinum and factory calibration certificate, 5-point; see additional specification<br />
M Platinum and DKD certificate; see additional specification<br />
70 Process connection; Material:<br />
B 1/4 – 18 NPT IEC 61518, mounting: 7/16 – 20 UNF, C22.8 (CRN)<br />
D 1/4 – 18 NPT IEC 61518, mounting: 7/16 – 20 UNF, AISI 316L (CRN)<br />
F 1/4 – 18 NPT IEC 61518, mounting: 7/16 – 20 UNF, Alloy C (CRN)<br />
G 1/4 – 18 NPT IEC 61518, mounting: 7/16 – 20 UNF, PVDF<br />
U RC 1/4 mounting: 7/16 – 20 UNF, AISI 316L (CRN)<br />
1 1/4 – 18 NPT, mounting: PN 160: M10, C22.8 (CRN)<br />
2 1/4 – 18 NPT, mounting: PN 160: M10, AISI 316L (CRN)<br />
3 1/4 – 18 NPT, mounting: PN 160: M10, Alloy C (CRN)<br />
80 Seal:<br />
A FKM Viton<br />
B EPDM<br />
D Kalrez<br />
E Chemraz<br />
1 FKM Viton, cleaned from oil and grease<br />
2 FKM Viton, cleaned for oxygen service<br />
Note application limits pressure/temp.<br />
100 Additional option 1:<br />
A Not selected<br />
E SIL/IEC 61508 Declaration of Conformity<br />
B Material test certificate for wetted components, inspection certificate as per<br />
EN 10204 3.1 acc. to specification 52005<strong>75</strong>9<br />
M Overvoltage protection<br />
J Software setting, see additional spec.<br />
Min alarm current<br />
HART burst mode PV<br />
Min alarm current + HART burst mode PV<br />
N HistoROM/M-DAT<br />
S GL/ABS marine certificate<br />
U Mounting bracket, wall/pipe, 304<br />
V Mounting on shut-off valve from above<br />
W Mounting on shut-off valve from below<br />
2 Test report acc. to EN10204 2.2<br />
3 Routine test with certificate, inspection certificate as per EN 10204 3.1<br />
4 Overpressure test with certificate,<br />
inspection certificate as per EN 10204 3.1<br />
70 Endress+Hauser<br />
AoteWell International.inc sales@aotewell.com Tel: +852-6563-2160
Change language