Deltabar S PMD70/75 FMD76/77/78

www.aotewell.com www.fa-market.com info@aotewell.com
Deltabar S
Certificates and approvals
CE mark
Ex approvals
The device meets the legal requirements of the relevant EC directives.
Endress+Hauser confirms that the device has been successfully tested by applying the CE mark.
•ATEX
•FM
•CSA
•NEPSI
•IECEx
• GOST on request
• Also combinations of different approvals
All explosion protection data are given in separate documentation which is available upon request. The
Ex documentation is supplied as standard with all devices approved for use in explosion hazardous areas.
ä 85, "Safety Instructions" and "Installation/Control Drawings" sections.
Suitability for hygienic
processes
The Deltabar S is suitable for use in hygienic processes.
Overview of suitable process connections from ä 81 ff.
Many versions meet the requirements of 3A-Sanitary Standard No. 74 and
are certified by the EHEDG.
Suitable fittings and seals must be used to ensure hygiene-compliant
design according to the specifications of 3A and EHEDG.
Note!
The gap-free connections can be cleaned without residue using
the usual cleaning methods.
TYPE EL
October 2007
74 -
Marine certificate
• GL: FMD76, FMD78, PMD70, PMD75
• ABS: FMD76, FMD78, PMD70, PMD75
Functional Safety SIL /
IEC 61508 Declaration of
Conformity (optional)
Overfill protection
CRN approvals
Pressure Equipment Directive
(PED)
The Deltabar S with 4 to 20 mA output signal has been developed to IEC 61508 standard. The device can be
used for flow, level and differential pressure monitoring up to SIL 3.
È For a detailed description of the safety functions with Deltabar S, settings and characteristic quantities for
functional safety, please refer to the "Functional Safety Manual - Deltabar S" SD189.
È For devices with SIL / IEC 61508 Declaration of Conformity see ä 69 ff, feature 100 "Additional
option 1" and feature 110 "Additional option 2" version E "SIL / IEC 61508, Declaration of Conformity".
WHG. See "Ordering information" ä 69 (see also ZE259P/00/DE).
Some device versions have CRN approval. For a CRN-approved device, a CRN-approved process connection
( ä 69 ff, feature 70 "Process connection") has to be ordered with a CSA approval ( ä 69 ff, feature 10
"Approval"). These devices are fitted with a separate plate bearing the registration number 0F10524.5C.
The devices PMD70, PMD75, FMD76, FMD77 and FMD78 correspond to Article 3 (3) of the EC directive
97/23/EC (Pressure Equipment Directive) and have been designed and manufactured according to good
engineering practice.
The following also applies:
– FMD78 with pipe diaphragm seal 1.5"/PN40:
Suitable for stable gases in group 1, category II
– PMD75, PN 420
Suitable for stable gases in group 1, category I
Standards and guidelines DIN EN 60770 (IEC 60770):
Transmitters for use in industrial-process control systems
Part 1: Methods for performance evaluation
DIN 16086:
Electrical pressure measuring instruments, pressure sensors, pressure transmitters, pressure measuring
instruments, concepts, specifications on data sheets
EN 61326-X:
EMC product family standard for electrical equipment for measurement, control and laboratory use.
68 Endress+Hauser
AoteWell International.inc sales@aotewell.com Tel: +852-6563-2160