Deltabar S PMD70/75 FMD76/77/78

www.aotewell.com www.fa-market.com info@aotewell.com
Deltabar S
Process connections FMD78
with diaphragm seal
(continued)
Taper adapter with coupling nut, DIN 11851 (dairy fitting)
40
m
k
f
d M
D
G
Process connection FMD78, material AISI 316L, surface roughness of the surfaces in contact with the medium
R a 0.8 m (31.5 in) as standard. Lower surface roughness on request.
P01-FMD78xxx-06-09-xx-xx-007
Taper adapter Slotted nut Diaphragm seal
Version
Nomin
al
diamet
er
Nomin
al
pressur
e
Diamet
er
Adapter
height
Thread Height Height Max.
diameter of
the process
isolating
diaphragm
Weight of
two
diaphragm
seals
D f G k m d M
[mm] [mm] [mm] [mm] [mm] [kg]
MR DN 50 PN 25 68.5 11 Rd 78 x 1/6" 22 19 52 2.2
MS DN 65 PN 25 86 12 Rd 95 x 1/6" 25 21 66 4.0
MT DN 80 PN 25 100 12 Rd 110 x 1/4" 30 26 81 5.1
Threaded adapter, DIN 11851 (dairy fitting)
h
d M
d 1
G
Process connection FMD78, material AISI 316L, surface roughness of the surfaces in contact with the medium
R a 0.8 m (31.5 in) as standard. Lower surface roughness on request.
P01-FMD78xxx-06-09-xx-xx-008
Threaded adapter
Diaphragm seal
Version
Nominal
diameter
Nominal
pressure
Diameter Height Thread Max. diameter
of the process
isolating
diaphragm
Weight of two
diaphragm
seals
d 1 h G d M
[mm] [mm] [mm] [kg]
M3 DN 50 PN 25 54 35 Rd 78 x 1/6" 52 1.8
M4 DN 65 PN 25 71 40 Rd 95 x 1/6" 66 3.4
M5 DN 80 PN 25 85 40 Rd 110 x 1/4" 81 4.0
48 Endress+Hauser
AoteWell International.inc sales@aotewell.com Tel: +852-6563-2160