Deltabar S PMD70/75 FMD76/77/78
Deltabar S, PMD70, PMD75, FMD76, FMD77, FMD78 - from AoteWell
Deltabar S, PMD70, PMD75, FMD76, FMD77, FMD78 - from AoteWell
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
www.aotewell.com www.fa-market.com info@aotewell.com<br />
<strong>Deltabar</strong> S<br />
Process connection <strong>FMD76</strong><br />
with ceramic process isolating<br />
diaphragms (continued)<br />
ANSI flanges, connection dimensions as per ANSI B 16.5, raised face RF and<br />
JIS flanges, connection dimensions as per JIS B 2220 BL, raised face RF<br />
41.3<br />
1.63 in<br />
41<br />
1.61 in<br />
7/16-20 UNF<br />
g 2<br />
h<br />
H<br />
1/4-18 NPT<br />
ANSI<br />
1.6 (0.06 in)<br />
JIS<br />
2 (0.0<strong>78</strong> in)<br />
ø46<br />
ø1.81 in<br />
g<br />
k<br />
D<br />
b<br />
Process connection <strong>FMD76</strong>, high-pressure side: ANSI or JIS flange,<br />
Low-pressure side: connection 1/4-18 NPT<br />
H Device height see ä 39, "Device height H, devices with flange" section<br />
h Height of the device without flange thickness b<br />
P01-<strong>FMD76</strong>xxx-06-09-xx-xx-001<br />
Flange 1<br />
Boltholes<br />
Version<br />
Material<br />
Nominal<br />
diameter<br />
Class/<br />
nominal<br />
pressure<br />
Diameter Thickness Raised face Quantity Diameter Hole circle Flange<br />
weight 2<br />
D b g g 2 k<br />
[in (mm)] [in (mm)] [in (mm)] [in (mm)] [in (mm)] [kg]<br />
ANSI flanges<br />
P AISI 316/316L 3 3 in 150 lb./sq.in 7.5 (190.5) 0.94 (23.9) 5 (127) 4 0.<strong>75</strong> (19.1) 6 (152.4) 4.9<br />
R ECTFE 4 4.9<br />
S Alloy C276 5.5<br />
T AISI 316/316L 4 in 150 lb./sq.in 9 (228.5) 0.94 (23.9) 6.19 (157.2) 8 0.<strong>75</strong> (19.1) 7.5 (190.5) 7.1<br />
U ECTFE 7.1<br />
V Alloy C276 8<br />
W AISI 316/316L 4 in 300 lb./sq.in 10 (254) 1.25 (31.8) 6.19 (157.2) 8 0.88 (22.4) 7.88 (200.2) 11.7<br />
JIS flanges<br />
1 AISI 316L 80 A 10 K 7.32 (185) 0.71 (18) 5 (127) 8 0.<strong>75</strong> (19.1) 5.9 (150) 3.3<br />
3 Alloy C276 3.7<br />
4 AISI 316L 100 A 10 K 8.27 (210) 0.71 (18) 5.95 (151) 8 0.<strong>75</strong> (19.1) 6.89 (1<strong>75</strong>) 4.4<br />
1) The roughness of the surface in contact with the medium, including the sealing surface of the flanges (all standards) made of Hastelloy C, Monel or tantalum,<br />
is Ra 0.8 μm (31.5 in). Lower surface roughness on request.<br />
2) Housing weight see ä 51<br />
3) Combination of AISI 316 for required pressure resistance and AISI 316L for required chemical resistance (dual rated)<br />
4) ECTFE coating on AISI 316/316L. When operating in hazardous areas, avoid electrostatic charge of the plastic surfaces.<br />
38 Endress+Hauser<br />
AoteWell International.inc sales@aotewell.com Tel: +852-6563-2160