Level-Radar micropilot M FMR 230/231/240
Level-Radar micropilot M FMR 230/231/240 - from AoteWell
Level-Radar micropilot M FMR 230/231/240 - from AoteWell
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
www.aotewell.com www.fa-market.com info@aotewell.com<br />
Micropilot M<br />
Installation in bypass<br />
<strong>FMR</strong> <strong>230</strong> / <strong>240</strong><br />
Optimum mounting position<br />
L00-<strong>FMR</strong><strong>230</strong>xx-17-00-00-en-007<br />
Standard installation<br />
• Observe installation instructions on page 13.<br />
• Marker is aligned perpendicular (90°) to tank connectors.<br />
• The marker is always exactly in the middle between two bolt-holes in the flange.<br />
• After mounting, the housing can be turned 350° in order to simplify access to the display and<br />
the terminal compartment.<br />
• The horn must be aligned vertically.<br />
• Measurements can be performed through an open ball valve without any problems.<br />
Recommendations for the bypass pipe<br />
• Metal (no plastic or enamel coating)<br />
• Constant diameter<br />
• Select horn antenna as big as possible. For<br />
intermediate sizes (i.e. 95 mm) select next<br />
larger antenna and adapt it mechanically.<br />
• At any transition (i.e. when using a ball valve<br />
or mending pipe segments), no gap may be<br />
created exceeding 0.1 mm.<br />
• When using a <strong>FMR</strong> <strong>230</strong>, a limited accuracy<br />
has to be expected in an area 20 cm (8“)<br />
below the upper connection pipe.<br />
L00-<strong>FMR</strong>2xxxx-17-00-00-en-004<br />
20 Endress+Hauser<br />
AoteWell International.inc sales@aotewell.com Tel: +852-6563-2160
Change language