WNC-0300 54 / 108 Mbps Wireless PCI Adapter Bruger manual Version 2.0

6. Click “Properties” of the available wireless network, which you wish to connect or configure.
Please note that if you are going to change to a different 802.1x authentication EAP method, i.e. switch
from using MD5 to TLS, , you must remove the current existing wireless network from your Preferred
networks first, and add it in again.
To configure for using TLS authentication method, please follow steps 7 ~ 25.
Please follow steps 26 ~ for using MD5 authentication method.
46