WNC-0300 54 / 108 Mbps Wireless PCI Adapter Bruger manual Version 2.0

Recommendations

Info

3. The client sends its Network Access Identifier (NAI) – its user name – to the Access Point in an EAP Respond message. 4. The Access Point forwards the NAI to the RADIUS server with a RADIUS Access Request message. 5. The RADIUS server responds to the client with its digital certificate. 6. The client validates the digital certificate, and replies its own digital certificate to the RADIUS server. 7. The RADIUS server validates client’s digital certificate. 8. The client and RADIUS server derive encryption keys. 9. The RADIUS server sends the access point a RADIUS ACCEPT message, including the client’s WEP key. 10. The Access Point sends the client an EAP Success message along with the broadcast key and key length, all encrypted with the client’s WEP key. Supplicant: LevelOne WNC-0300 54Mbps Wireless PCI Adapter Here is the setup for LevelOne WNC-0300 Wireless PCI Adapter under Windows XP, which is the only Operating System that our driver supports for 802.1x. Microsoft is planning on supporting 802.1x security in all common Windows Operating System including Win98SE/ME/2000 by releasing Service Pack in 2003. Please note that the setup illustration is based on LevelOne WNC-0300 54Mbps wireless PCI Adapter. 1. Go to Start > Control Panel 2. Double-click on “Network Connections” 3. Right-click on the Wireless Network Connection that you use with LevelOne WNC-0300 54Mbps wireless network PCI Adapter. 4. Click “Properties” to open up the Properties setting window. 44
5. Click on the “Wireless Network” tab. 45
Page 1 and 2: LevelOne WNC-0300 54 / 108 Mbps Wir
Page 3 and 4: Indholdsfortegnelse. Introduktion 4
Page 5 and 6: KOM I GANG Lær LevelOne WNC-0300 A
Page 7 and 8: Installér dit LevelOne WNC-0300 Ut
Page 9 and 10: Klik “Next” for at starte insta
Page 11 and 12: Ovenstående billede fremkommer nå
Page 13 and 14: Konf iguration Denne side benyttes
Page 15 and 16: vet i IEEE Std 802.11b). Hos modtag
Page 17 and 18: Available Network - vis de trådlø
Page 19 and 20: Denne side viser noget information
Page 21 and 22: Klik på ”Hardware” 21
Page 23 and 24: Højre-klik på den trådløse netv
Page 25 and 26: Gå til Start menu > Kontrolpanel >
Page 27 and 28: 1. Skriv en kort beskrivelse for di
Page 29 and 30: Du kan oprette en netværks diskett
Page 31 and 32: Klik “Færdig” for at afslutte
Page 33 and 34: Skriv cmd, “ipconfig /renew” i
Page 35 and 36: Dynamisk Tildelt IP Adresse 35
Page 37 and 38: Trådløst Netværk Under Windows 2
Page 39 and 40: Vælg “Brug følgende IPadresse
Page 41 and 42: TCP/IP egenskabs vinduet kommer fre
Page 43: APPENDIX C: 802.1x Genkendelse Der
Page 47 and 48: TLS Authentication 7. Select “The
Page 49 and 50: 14. Enter your user name and passwo
Page 51 and 52: 19. The Certificate Service is now
Page 53 and 54: 23. Windows XP will prompt you to s
Page 55 and 56: Please note that that value of Netw
Page 57 and 58: Authenticator: Wireless Network Acc
Page 59 and 60: 5. Select “Enterprise root CA”,
Page 61 and 62: 12. Right-click on domain, and sele
Page 63 and 64: 17. The Automatic Certificate Reque
Page 65 and 66: 25. Right-click “Client”, and s
Page 67 and 68: 31. Unless you want to specify the
Page 69 and 70: For TLS Authentication Setup (Steps
Page 71 and 72: 38. Go to the “Dial-in” tab, an
Page 73 and 74: 41. Select “Group Policy” tab,
Page 75 and 76: 45. Go to Users. Right-click on the
Page 77 and 78: 51. Right-click “MD5”, and sele
Page 79 and 80: 1. Open System : Genkendelse som å
Page 81 and 82: Kryptering ~ En sikkerheds metode s
Page 83: Interface PCI Standard v2.2 Power V

WNC-0300 54 / 108 Mbps Wireless PCI Adapter Bruger manual Version 2.0

Create successful ePaper yourself

Delete template?

Save as template?