Order spare parts under correct spare part codes

Eqvithermal controller ACD01
GSM module-controller AB01 ATMOS
Code: P0404 eqvithermal controller ACD01 Price:
Weight: 0,78 kg
It is equithermal controll element for all boilers ATMOS burning
solid fules, which is able to controll heating in two heating circuit,
hot domestic water heating, solar heating by solar collectors,
optima charging and discharging of accumulation tanks, authomatic
switching between two boilers, (e.g. wood boiler and natural gas
boiler) and commplet operation of the boiler, extraction ventilator
when there is need in heating system.
Connection terminal board SCS 12
Code: P0430 GSM module-controller Price:
AB01 ATMOS
Weight: 1,60 kg
It is a special multifunction unit, which is use for conntrolling and
comunication with different units in house or in weekend house
over mobile phone(GSM). The main use is for remote controll of
automatic heating systems with pellets, natural gas and oil boilers.
It is special developed for controlling of four-status equithermal
regulátor ATMOS ACD 01 or Honeywell type SMILE. It is also
able to inform about ouside temperature, interior temperature,
heating system temperature and communication with other units
and appliance. Modul is also equiped with program for optimal
controll pellets boiler with acumulation tanks and with program
for controll two or three boilers in cascade.
Controller APP200
Code: P0405 connection terminal board
for equithermal controller ACD01
Price:
Weight: 0,36 kg
Controller AP1000
Code: P0427 controller AP1000
Price:
Weight: 1,26 kg
Is arrangement, which is able to set in advance authomatic start of
the pellets burner after burn out of the wood in combi – gasification
wood boilers equiped by pellets, natural gas or oil burner – type
DCxxSP(L), EP(L).
39
Code: P0429 controller APP200
Price:
Weight: 1,64 kg
Is arrangement to control optimally any pellet boiler installed with
buffer tank 500 l or 1000 l. The unit controles operation of the
burner based on temperatures at the top of the buffer tank and
at the bottom of the buffer tank. Sensor at the top of the buffer
tank serves to start the pellet burner (pellet boiler) when the water
in tank is cold. Sensor at the bottom of the buffer tank serves to
stop the pellet burner (pellet boiler) after the water is hot enough.
By this way the unit optimises operation of the burner, namely
in transient periods of the heating season. Its way it saves fuel
and prolong lifetime of all elecrtical and electronical parts of the
burner as well as lifetime of the heating spirale.