268954910-Renault-Scenic.pdf

WHEELS AND TYRES
Wheel: Removal - Refitting
35A
If this procedure does not work:
a Strike the inner surface of the wheel (2) using a mallet
and a wooden block to detach it.
a Remove:
106089
Note:
Do not strike the surface of the wheel using
excessive force as this may damage it.
124750
a Coat the wheel-mating face (3) with COPPER ANTI-
SEIZE AGENT (see Vehicle: Parts and ingredients
for the repairwork) (04B, Consumables -
Products).
a Align the mark on the wheel with the mark made on
the hub when it was removed.
a Fit the wheel to the vehicle, positioning the valve at
the top.
a Insert the wheel bolts.
- the wheel bolts,
- the wheel.
REFITTING
I - REFITTING PREPARATION OPERATION
a Clean the hub carrier using a wire brush.
Note:
There are two types of wheel bolts for aluminium
and steel wheel rims; do not swap them.
a Check the condition of the tyre.
a Do not move or remove the balance weights.
II - REFITTING OPERATION FOR PART
CONCERNED
a Clean the "wheel - hub carrier" contact surfaces
using a wire brush.
35A-2