268954910-Renault-Scenic.pdf

REAR AXLE COMPONENTS
Complete rear axle: Removal - Refitting
33A
a Remove the component jack.
2 - Right-hand side
a Fit the component jack with a shim, under the
spring cup.
a Check the position of the bump stop on the axle assembly.
a Compress the rear axle.
a Refit the shock absorber lower mounting.
a Remove the component jack.
a Lower the lift.
a Torque tighten the shock absorber lower mountings
(10.5 daNm).
a Raise the lift again.
a Refit the rear axle protective cowling, replacing the
damaged plastic clips.
a Refit the rear wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
a Torque tighten the wheel bolts (13 daNm).
33A-26