268954910-Renault-Scenic.pdf

REAR AXLE COMPONENTS
Rear axle rubber bearing: Removal - Refitting
33A
Essential special tooling
Tar. 1838
Tool for removing and refitting
rear axle rubber bushes
Tightening torquesm
the nut of the cover B
new bolts of the rubber
bearings
16 Nm
130 Nm
REMOVAL
I - REFITTING PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove:
- the rear wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) ,
-the rear axle (see 33A, Rear axle components,
Complete rear axle: Removal - Refitting, page
33A-21) .
126257
a Mark the position of the rubber bush on the rear
axle, take the notch (3) on the rubber bush as a
mark.
a Mark the rear axle aligning it with the notch.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
122816
a Remove the rubber bushes by hitting them with a
hammer or the bush castor of the tool (Tar. 1838).
125483
a Remove:
- the bearings bolt (1) ,
- the bearings (2) .
33A-19