268954910-Renault-Scenic.pdf

REAR AXLE COMPONENTS
Bearing: Removal - Refitting
33A
REMOVAL
REFITTING
a Remove the brake disc (see 33A, Rear axle components,
Rear brake disc: Removal - Refitting,
page 33A-8) .
a
WARNING
Take care not to mark the wheel speed sensor
target on the bearing fitted with it when refitting.
WARNING
Clean:
- the internal and external surfaces of the new
bearing in contact with the hub carrier and the
stub-axle,
- the hub carrier surfaces in contact with the new
bearing,
- the stub-axle surfaces in contact with the new
bearing,
a Remove the circlip (1)
104528
WARNING
Before refitting the bearing, the condition of the
stub-axle surface and the bore of the hub carrier
must be checked. Replace the hub carrier if it is
faulty.
WARNING
Do not apply pressure to the inner bearing bush,
to avoid damaging the bearing (significant force
is required for fitting).
104396
a Remove the bearing with a press, applying pressure
with a 49 mm diameter tube.
33A-13