268954910-Renault-Scenic.pdf

REAR AXLE COMPONENTS
Brake pipe: Removal - Refitting
33A
106768
a To refit, proceed in the reverse order of removal.
IMPORTANT
Make sure that the underbody brake pipes are
not under any strain at all the clips, and that they
are not crossed. If the brake pipes are crossed,
the ABS and ESP systems will not work properly.
a Torque tighten:
- the rigid brake pipe on the rear axle (1.4 daNm),
- the rigid brake pipe on the calliper (1.4 daNm).
a Bleed the brake circuit (see 30A, General information,
Brake circuit Bleeding, page 30A-2) .
33A-12