268954910-Renault-Scenic.pdf

REAR AXLE COMPONENTS
Brake pipe: Removal - Refitting
33A
II - REAR RIGHT-HAND RIGID BRAKE PIPE
Essential equipment
pedal press
Tightening torquesm
rigid brake pipe on the
rear axle
rigid brake pipe on the
calliper
1.4 daNm
1.4 daNm
The pipes have a rigid and a flexible section.
WARNING
Prepare for brake fluid outflow, to prevent damage
to the mechanical parts and bodywork around the
braking system.
104399
REMOVAL
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 370, 02, Lifting equipment).
a Fit the pedal press to the brake pedal to limit the
outflow of brake fluid.
a Raise the vehicle.
I - REAR LEFT-HAND BRAKE RIGID PIPE
a Unscrew:
- the rigid brake pipe at the rear axle (3) ,
- the rigid pipe at the calliper (4) .
a Unclip the rear axle rigid brake pipe.
a Remove the rigid brake pipe.
REFITTING
a
WARNING
Do not twist the brake pipe.
Make sure that there is no contact between the
brake pipe and the surrounding components.
104398
a Unscrew:
- the rigid brake pipe at the rear axle (1) ,
- the rigid pipe at the calliper (2) .
a Unclip the rear axle rigid brake pipe.
a Remove the rigid brake pipe.
33A-11