268954910-Renault-Scenic.pdf

REAR AXLE COMPONENTS
Rear brake disc: Removal - Refitting
33A
a Check the condition of the braking components (replace
the faulty parts), (see 30A, General information,
Brake: Specifications, page 30A-6) .
a Refit the parking brake cables (5) .
101306
a Clean the callipers and calliper mountings using the
cleaning station.
REFITTING
a
117348
Note:
Coat the calliper mounting and guide pin bolts
with HIGH RESISTANCE THREAD LOCK product
before fitting them.
a Torque tighten:
- the stub-axle nuts (standard chassis) (220 Nm),
a Check that the parking brake cable stops are properly
engaged in their housing.
Note:
Depress the brake pedal several times to bring
the pistons, brake pads and discs into contact.
a Check the brake fluid level.
a Apply the parking brake control several times to activate
the locking and unlocking function and to activate
the calliper automatic play compensation.
a Refit the wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
- the stub-axle nuts (long chassis) (280 Nm),
- the calliper mounting bolts (105 Nm),
- the guide pin bolts (36 Nm).
33A-10