268954910-Renault-Scenic.pdf

REAR AXLE COMPONENTS
Rear brake disc: Removal - Refitting
33A
Essential special tooling
Fre. 1190-01
Brake calliper piston return
tool.
Tightening torquesm
stub-axle nuts (standard
chassis)
stub-axle nuts (long
chassis)
calliper mounting bolts
guide pin bolts
220 Nm
280 Nm
105 Nm
36 Nm
Brake discs cannot be reground. If there is excessive
wear or scoring, the brake discs must be replaced (see
30A, General information, Brake: Specifications,
page 30A-6) .
When replacing a brake disc, be sure to replace the
disc on the opposite side.
When replacing a brake disc, be sure to replace the
brake pads.
a Unclip the parking brake cables (1) .
101301
REMOVAL
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 370, 02A, Lifting equipment).
a Remove the wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
a Remove the brake calliper lower bolts (2) .
101306
33A-8