268954910-Renault-Scenic.pdf

REAR AXLE COMPONENTS
Rear brake disc: Description
33A
I - PREPARATION OPERATION FOR CHECK
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
Remove the rear wheel concerned (see 35A, Wheels
and tyres, Wheel: Removal - Refitting, page 35A-1) .
II - CHECKING OPERATION FOR PART
CONCERNED
Note:
Use a Palmer type tool to check the thickness of the
disc.
99582
Measure the thickness of the disc at 4 points in order
(90˚ apart).
Compare the values with those recommended by the
manufacturer (see 30A, General information, Brake:
Specifications, page 30A-6) .
III - FINAL OPERATION
Replace the discs if necessary (see 33A, Rear axle
components, Rear brake disc: Removal - Refitting,
page 33A-8) .
Refit the rear wheel concerned (see 35A, Wheels and
tyres, Wheel: Removal - Refitting, page 35A-1) .
117058
Position the Palmer tool (1) to measure the disc thickness.
33A-7