268954910-Renault-Scenic.pdf

REAR AXLE COMPONENTS
Rear brake caliper: Removal - Refitting
33A
REFITTING
18931
a Push the calliper piston back using the (Fre. 1190-
01) until it reaches the end of its bore.
a Refit:
- the brake pads,
- the calliper,
- the guide pin bolts.
Note:
Coat the guide pin bolts with HIGH RESIS-
TANCE THREAD LOCK product before fitting.
a Refit the parking brake cable.
101306
a Check that the parking brake cable stop is properly
engaged in its housing.
a Bleed the brake circuit (see 30A, General information,
Brake circuit Bleeding, page 30A-2) .
a Check the brake fluid level.
a Apply the parking brake control several times to activate
the locking - unlocking function and to activate
the calliper automatic play compensation.
a Refit the wheel (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
a Torque tighten:
- the guide pin bolts (36 Nm),
- the brake hose (17 Nm).
33A-4