268954910-Renault-Scenic.pdf

REAR AXLE COMPONENTS
Rear brake caliper: Removal - Refitting
33A
Essential special tooling
Fre. 1190-01
Brake calliper piston return
tool.
Essential equipment
pedal press
Tightening torquesm
guide pin bolts
brake hose
36 Nm
17 Nm
Note:
The callipers supplied as spare parts are supplied
pre-filled.
WARNING
Prepare for brake fluid outflow, to prevent damage
to the mechanical parts and bodywork around the
braking system.
117348
a Clean the calliper and calliper mounting using the
cleaning station.
REMOVAL
a Position the vehicle on a two-post lift.
a Release the automatic parking brake (see Parking
brake) .
a Fit the pedal press to the brake pedal to limit the
outflow of brake fluid.
a Remove the rear wheel.
a Detach the parking brake cable.
a Note the parking brake cable routing for refitting.
a Undo the brake hose.
a Remove:
- the guide pin mounting bolts,
- the calliper,
- the brake pads.
a Cap the hose.
a Check the condition of the braking components (replace
the faulty parts), (see 30A, General information,
Brake: Specifications, page 30A-6) .
33A-3