268954910-Renault-Scenic.pdf

REAR AXLE COMPONENTS
Rear brake pads: Removal - Refitting
33A
a Refit the parking brake cable.
IMPORTANT
To avoid any accident, bring the pistons, brake
pads and brake discs into contact by depressing
the brake pad several times.
a Operate the parking brake control several times to
activate the locking and unlocking function and the
calliper self-adjustment.
III - FINAL OPERATION
a Refit the rear wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
18931
a Push the calliper piston back using the (Fre. 1190-
01) until it reaches the end of its bore.
a Remove the protective film from the brake pad.
127485
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- the new brake pads,
- the brake calliper.
a Torque tighten the calliper guide pin lower bolt (36
N.m).
33A-2