268954910-Renault-Scenic.pdf

FRONT AXLE COMPONENTS
Front axle sub-frame: Removal - Refitting
31A
F4R or F9Q or M9R
a Torque tighten the engine tie-bar bolts on the F or
M engine support (180Nm).
K4J or K4M or K9K
a Torque tighten the engine tie-bar bolts on the K
engine (105Nm).
a Refit the wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
a Refit the floor carpet.
Note:
Check that the floor carpet reaches under the
accelerator pedal end-stop.
a Adjust the axle assemblies (see 30A, General information,
Front axle: Adjustment values, page
30A-14) .
a Initialise the xenon bulb system (if fitted to the vehicle)
(see Fault finding - Configurations and programming)
(MR 372, 80C, Xenon bulbs).
31A-31