268954910-Renault-Scenic.pdf

FRONT AXLE COMPONENTS
Front axle sub-frame: Removal - Refitting
31A
101354
a Observe the direction of fitting for the universal joint
cam nut and bolt.
a Refit the universal joint.
a Refit the universal joint cam nut and bolt.
a Position the universal joint cam nut and bolt.
116021
a Lock the cam nut in its housing (on the universal
joint).
a Pretighten the universal joint cam nut and bolt.
a Identify the make of the steering column (see 36A,
Steering assembly, Steering column: Removal -
Refitting, page 36A-8) .
a Torque tighten:
116022
- the universal joint bolt (TRW column) (30 Nm),
- the universal joint bolt (NSK column) (44 Nm)
a Check that the universal joint is in the correct position.
WARNING
Refasten the brake hose and wheel speed sensor
wiring if they have been unclipped.
Do not twist the brake hose.
31A-30