268954910-Renault-Scenic.pdf

FRONT AXLE COMPONENTS
Spring and front shock absorber: Removal - Refitting
31A
101939
a Respect the order and direction of fitting for the
constituent parts.
Note:
Make sure that the rotary stop is correctly oriented
to facilitate refitting above and below.
a Fit the index bolt (6) in its housing.
a Proceed in the reverse order to removal.
a Torque tighten:
104428
- the shock absorber turret mounting bolts (17
Nm),
- the shock absorber base mounting bolt (105
Nm),
- the anti-roll bar tie-rod ball joint mounting nut
(44 Nm).
a Refit:
- the anti-roll bar tie-rod ball joint,
-the windscreen wiper mechanism (see Windscreen
wiper mechanism: Removal - Refitting)
(MR 370, 85A, Wiping - Washing).
96049
a The shock absorber rod nut must be replaced.
a Torque tighten the shock absorber rod nut (62
Nm).
a Decompress the spring.
a Remove the spring compressor.
WARNING
Refasten the brake hose and wheel speed sensor
wiring if they have been unclipped.
Do not twist the brake hose.
a Refit the front wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
a Connect the battery (see Battery : Removal - Refitting)
(MR 370, 80A, Battery).
31A-21