268954910-Renault-Scenic.pdf
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FRONT AXLE COMPONENTS<br />
Spring and front shock absorber: Removal - Refitting<br />
31A<br />
Essential special tooling<br />
Sus. 1731<br />
Front shock absorber removal<br />
tool.<br />
spring compressor<br />
Essential equipment<br />
spanner for shock absorber rod nut<br />
Tightening torquesm<br />
shock absorber rod nut<br />
62 Nm<br />
shock absorber turret<br />
mounting bolts<br />
17 Nm<br />
shock absorber base<br />
mounting bolt<br />
105 Nm<br />
anti-roll bar tie-rod ball<br />
joint mounting nut<br />
44 Nm<br />
a Remove:<br />
- the shock absorber base mounting bolt (1) ,<br />
101215<br />
REMOVAL<br />
a Position the vehicle on a two-post lift (see Vehicle:<br />
Towing and lifting) (MR 370, 02A, Lifting equipment).<br />
- the front brake calliper mounting bolt (2) .<br />
a Suspend the « front brake calliper mounting -<br />
calliper » assembly.<br />
a Disconnect the battery (see Battery : Removal -<br />
Refitting) (MR 370, 80A, Battery).<br />
a Remove the front wheels (see 35A, Wheels and tyres,<br />
Wheel: Removal - Refitting, page 35A-1) .<br />
a Unclip the brake hose from the shock absorber and<br />
the wheel speed sensor cable.<br />
a Remove:<br />
- the anti-roll bar tie-rod ball joint,<br />
-the windscreen wiper mechanism (see Windscreen<br />
wiper mechanism: Removal - Refitting)<br />
(MR 370, 85A, Wiping - Washing).<br />
a Position the (Sus. 1731).<br />
112078<br />
a Tighten the bolt (3) of the (Sus. 1731) to separate<br />
the shock absorber base from the hub carrier.<br />
a Ensure that the section (4) of the (Sus. 1731) is<br />
pressed firmly against the shock absorber base.<br />
a Suspend the hub carrier<br />
31A-18