268954910-Renault-Scenic.pdf

FRONT AXLE COMPONENTS
Front hub carrier bearing: Removal - Refitting
31A
a Refit the sensor holder.
101934
a Refit the circlip.
101933
a Position the sensor holder at (x) = 35˚ ± 5˚ from vertical.
This position corresponds to the centre of the
housing.
a Check that the circlips are correctly positioned by
measuring the inner diameter (Z = 67.6 mm) for a
bearing with an outer diameter of 77 mm.
20788
a Apply force to the external bearing bush using a pipe
with an outer diameter of 77 mm and bore diameter
of 70 mm.
31A-16